Lexus NX: Portable Player cannot be Connected Manually/Automatically
CAUTION / NOTICE / HINT
HINT:
Some versions of "Bluetooth" compatible audio players may not function properly, or the functions may be limited using the radio receiver assembly, even if the portable audio player itself can play files.
Click here .gif)
PROCEDURE
| 1. | CHECK CONNECTED DEVICE SETTINGS |
(a) Check if the portable player is registered as a connected device.
NOTICE:
If a cellular phone is used as a portable player, it must be registered independently from the registration that is performed for the hands-free system.
HINT:
Only 5 portable players can be registered.
| Result | Proceed to |
|---|---|
| The portable player is registered as a connected device. | A |
| The portable player is not registered as a connected device. | B |
| B | .gif) | REGISTER PORTABLE PLAYER AS CONNECTED DEVICE |
|
.gif)
| 2. | CHECK SYMPTOMS |
(a) Check the connection condition between the portable player and radio receiver assembly.
HINT:
The portable player cannot be connected under any of the following conditions:
- The portable player is connected to another device.
- The portable player is connected to the radio receiver assembly using the hands-free function.
- The radio receiver assembly has cleared the portable player registration.
- The portable player is off.
| Result | Proceed to |
|---|---|
| The portable player cannot be connected automatically. | A |
| The portable player cannot be connected manually. | B |
| B | | GO TO STEP 4 |
|
| 3. | CHECK AUTOMATIC CONNECTION SETTINGS |
(a) Check the automatic connection settings of the "Bluetooth" audio.
(1) Check that the "Bluetooth" connection is on.
OK:
"Bluetooth" connection is on.
| NG | | TURN "Bluetooth" POWER TO ON |
|
| 4. | CHECK PORTABLE PLAYER STATUS |
(a) Check the status of the portable player.
(1) Check that the portable player is not in standby mode.
(2) Check that the portable player is not connected to another device (headphones, etc.).
OK:
The portable player is not in standby mode and not connected to another device (headphones, etc.).
| NG | | TAKE PORTABLE PLAYER OUT OF STANDBY MODE AND DISCONNECT OTHER DEVICES (HEADPHONES, etc.) |
|
| 5. | CHECK USING ANOTHER "Bluetooth" AUDIO COMPATIBLE VEHICLE OF SAME MODEL |
(a) Check if the portable player can be connected manually/automatically to another "Bluetooth" audio compatible vehicle of the same model.
OK:
The portable player can be connected manually/automatically.
| NG | | PORTABLE PLAYER IS NOT COMPATIBLE |
|
| 6. | REMOVE ADDITIONAL DEVICES WHICH USE RADIO WAVES |
(a) Remove additional devices which use radio waves.
(b) Check if the portable player can be connected manually/automatically.
OK:
The portable player can be connected manually/automatically.
| OK | | END |
| NG | | PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE |
READ NEXT:
Registered Device cannot be Deleted
PROCEDURE 1. DELETE OPERATION (a) Check if a registered portable player can be deleted normally. OK: Registered portable player can be deleted normally. OK END NG PROCEED TO
Portable Player cannot be Registered
CAUTION / NOTICE / HINT HINT: Some versions of "Bluetooth" compatible audio players may not function properly, or the functions may be limited using the radio receiver assembly, even if the portable a
USB Audio System Recognition/Play Error
DESCRIPTION When a USB device or "iPod" is connected to the USB jack of the No. 1 stereo jack adapter assembly, it must have playable files. The device must also communicate with and be recognized by
SEE MORE:
Dtc Check / Clear
DTC CHECK / CLEAR CHECK DTC (a) Connect the Techstream to the DLC3. (b) Turn the power switch on (IG). (c) Turn the intuitive parking assist system on. (d) Turn the Techstream on. (e) Enter the following menus: Body Electrical / Advanced Parking Guidance/ICS/Intuitive P/A / Trouble Codes. (f) Check
Voice Guidance Circuit between Radio Receiver and Stereo Component Amplifier
DESCRIPTION This circuit is used when the voice switch of the steering pad switch assembly is pushed. Using this circuit, the radio and display receiver assembly sends signals to the stereo component amplifier assembly. WIRING DIAGRAM PROCEDURE 1. CHECK HARNESS AND CONNECTOR (RADIO RECEIVER A
