Lexus NX: Customize Parameters
CUSTOMIZE PARAMETERS
CUSTOMIZE POWER MIRROR CONTROL SYSTEM
HINT:
The following items can be customized.
NOTICE:
- When the customer requests a change in a function, first make sure that the function can be customized.
- Record the current settings before customizing.
(a) Customizing with the Techstream
(1) Connect the Techstream to the DLC3.
(2) Turn the power switch on (IG).
(3) Turn the Techstream on.
(4) Enter the following menus: Customize / Others.
(5) Select the setting by referring to the table below.
Others| Tester Display | Description | Default | Setting | ECU |
|---|---|---|---|---|
| Auto Fold Mirror | Function that changes the condition under which the outer mirrors automatically retract | Door Lock | 01:ACC,10:Door Lock,11:OFF | Main body ECU (Multiplex network body ECU) |
| Reverse Coupled Actuation Mirror Angle | Function that turns the reverse shift-linked mirror position memorization function on or off | User Setting | 0:Default Setting,1:User Setting | Main body ECU (Multiplex network body ECU) |
READ NEXT:
Problem Symptoms Table
PROBLEM SYMPTOMS TABLE NOTICE: If the main body ECU (multiplex network body ECU) is replaced, refer to Registration. Click here HINT:
Use the table below to help determine the cause of problem
Terminals Of Ecu
TERMINALS OF ECU CHECK OUTER MIRROR CONTROL ECU ASSEMBLY LH (a) Disconnect the M5 ECU connector. (b) Measure the voltage and resistance according to the value(s) in the table below. Tester Connect
Data List / Active Test
DATA LIST / ACTIVE TEST DATA LIST HINT: Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. Th
SEE MORE:
Generator Torque Delivered Performance (P0E71-344)
DTC SUMMARY MALFUNCTION DESCRIPTION This DTC indicates that the generator torque execution value does not correspond to the torque command value from the hybrid vehicle control ECU to the generator. The cause of this malfunction may be one of the following: Area Main Malfunction Description S
Removal
REMOVAL PROCEDURE 1. PRECAUTION Click here 2. REMOVE FRONT BUMPER COVER (a) for Sport Pacakge: Click here (b) except Sport Pacakge: Click here 3. REMOVE NO. 3 ENGINE ROOM WIRE (a) for Sport Pacakge: Click here (b) except Sport Pacakge: Click here 4. REMOVE FRONT CORNER ULTRASONIC SENSOR
