Lexus NX: Installation

Lexus NX Service Manual / Vehicle Interior / Seat / Rear Seatback Heater(for Power Seat) / Installation

INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

PROCEDURE

1. INSTALL SEPARATE TYPE REAR SEATBACK COVER LH (REAR SEATBACK HEATER ASSEMBLY LH) (for LH Side)

HINT:

When installing the seat cover, refer to the precautions in order to prevent wrinkles from forming.
Click here
Align the seam allowance in a single direction as shown in the illustration.

(a) Using hog ring pliers, install the separate type rear seatback cover LH (rear seatback heater assembly LH) to the separate type rear seatback pad LH with 12 new hog rings in the order indicated in the illustration.

NOTICE:

Be careful not to damage the separate type rear seatback cover LH.
Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type rear seatback cover LH.

*1	Hog Ring Pliers

2. INSTALL SEPARETE TYPE REAR SEATBACK COVER WITH PAD (for LH Side)

Click here

3. INSTALL REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY (for LH Side)

Click here

4. INSTALL REAR SEAT CUSHION MOULDING LH (for LH Side)

Click here

5. INSTALL REAR SEAT CUSHION MOULDING LH (for LH Side)

Click here

6. INSTALL NO. 1 SEATBACK COVER (for LH Side)

Click here

7. INSTALL CENTER ARMREST HINGE COVER LH (for LH Side)

Click here

8. INSTALL CENTER SEAT HINGE COVER LH (for LH Side)

Click here

9. INSTALL NO. 1 SEAT ARMREST ASSEMBLY (for LH Side)

Click here

10. INSTALL REAR SEAT CENTER ARMREST ASSEMBLY (for LH Side)

Click here

11. INSTALL REAR SEAT ARMREST HOLE COVER (for LH Side)

Click here

12. INSTALL REAR SEATBACK BOARD CARPET ASSEMBLY LH (for LH Side)

Click here

13. INSTALL REAR SEAT CENTER HEADREST ASSEMBLY (for LH Side)

Click here

14. INSTALL REAR SEAT HEADREST ASSEMBLY (for LH Side)

Click here

15. INSTALL REAR SEAT INNER BELT ASSEMBLY LH (for LH Side)

Click here

16. INSTALL SEPARATE TYPE REAR SEATBACK COVER RH (REAR SEATBACK HEATER ASSEMBLY RH) (for RH Side)

HINT:

When installing the seat cover, refer to the precautions in order to prevent wrinkles from forming.
Click here
Align the seam allowance in a single direction as shown in the illustration.

(a) Using hog ring pliers, install the separate type rear seatback cover RH (rear seatback heater assembly RH) to the separate type rear seatback pad RH with 12 new hog rings in the order indicated in the illustration.

NOTICE:

Be careful not to damage the separate type rear seatback cover RH.
Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type rear seatback cover RH.

*1	Hog Ring Pliers

17. INSTALL SEPARATE TYPE REAR SEATBACK COVER WITH PAD (for RH Side)

Click here

18. INSTALL REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY (for RH Side)

Click here

19. INSTALL REAR SEAT CUSHION MOULDING RH (for RH Side)

Click here

20. INSTALL REAR SEAT CUSHION MOULDING RH (for RH Side)

Click here

21. INSTALL REAR SEATBACK BOARD CARPET ASSEMBLY RH (for RH Side)

Click here

22. INSTALL REAR SEAT HEADREST ASSEMBLY (for RH Side)

Click here

23. INSTALL REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH (for RH Side)

Click here

24. INSTALL REAR SEATBACK COVER

Click here

25. INSTALL REAR SEAT ASSEMBLY

Click here

26. INSPECT SEAT HEATER SYSTEM (for Rear Seat)

Click here

SEE MORE:

Components

COMPONENTS ILLUSTRATION *1 RAIN SENSOR *2 RAIN SENSOR COVER *3 RAIN SENSOR TAPE - -

Removal

REMOVAL PROCEDURE 1. REMOVE FRONT BUMPER ASSEMBLY Click here 2. REMOVE NO. 3 ENGINE ROOM WIRE Click here 3. REMOVE CLEARANCE LIGHT ASSEMBLY LH Click here 4. REMOVE CLEARANCE LIGHT ASSEMBLY RH HINT: Use the same procedure described for the LH side. 5. REMOVE HOOD TO FRONT END PANEL SEAL Click h

Lexus NX: Installation

READ NEXT:

Seat Heater Control (for Front Seat)

Seat Heater Control(for Rear Seat)

Components

SEE MORE:

Components

Removal