Lexus NX: Maintenance
Lexus NX Owners Manual / Maintenance and care / Maintenance
READ NEXT:
Maintenance requirements
To ensure safe and economical driving,
day-to-day care and regular
maintenance are essential. It is the
owner's responsibility to perform
regular checks. Lexus recommends
the following maintenanc
General maintenance
Listed below are the general maintenance
items that should be performed
at the intervals specified in
the "Warranty and Service Guide"
or "Owner's Manual Supplement".
It is recommended that any
SEE MORE:
Short to GND in Outer Mirror Indicator(Slave) (C1AB3)
DESCRIPTION This DTC is stored when the blind spot monitor sensor RH detects a ground short in the outer rear view mirror indicator RH. DTC No. Detection Item DTC Detection Condition Trouble Area Note C1AB3 Short to GND in Outer Mirror Indicator(Slave) Both of the following condi
Terminals Of Ecu
TERMINALS OF ECU CLEARANCE WARNING ECU ASSEMBLY (a) Disconnect the I20 clearance warning ECU assembly connector. (b) Measure the voltage and resistance on the wire harness side connector according to the value(s) in the table below. Terminal No. (Symbol) Wiring Color Terminal Description C
© 2016-2025 Copyright www.lexunx.com
