Lexus NX Owners Manual
Lexus NX Owners Manual
Explore Lexus NX Owners Manual. This manual was prepared to help you understand the operation and maintenance of your vehicle so that you may enjoy many miles of driving pleasure. Please read through this manual before operating your vehicle.
- For your information
- Pictorial index
- For safety and security
- Vehicle status information and indicators
- Warning lights and indicators
- Gauges and meters
- Multi-information display
- Head-up display
- Energy monitor/fuel consumption screen
- Before driving
- Key information
- Opening, closing and locking the doors
- Adjusting the seats
- Adjusting the steering wheel and mirrors
- Opening, closing the windows and moon roof
- Driving
- Before driving
- Driving procedures
- Operating the lights and wipers
- Refueling
- Using the driving support systems
- Driving tips
- Interior features
- Remote Touch
- Using the air conditioning system and defogger
- Using the interior lights
- Using the storage features
- Using the other interior features
- Maintenance and care
- When trouble arises
- Vehicle specifications
- For owners
READ NEXT:
For your information
Main Owner's Manual
Please note that this manual applies to
all models and explains all equipment,
including options. Therefore, you may
find some explanations for equipment
not installed on your
Pictorial index
Exterior
The shape of the headlights may differ depending on the grade, etc.
Side doors
Locking/unlocking
Opening/closing the side windows
Locking/unlocking by using the mechanical key
SEE MORE:
Open or Short in Steering Angle Sensor +B (C1625)
DESCRIPTION This DTC is stored if the rear television camera assembly receives a signal via CAN communication from the steering sensor that indicates a power supply problem. DTC No. Detection Item DTC Detection Condition Trouble Area C1625 Open or Short in Steering Angle Sensor +B O
Removal
REMOVAL PROCEDURE 1. REMOVE REAR BUMPER COVER Click here 2. REMOVE KICK DOOR CONTROL BRACKET (a) Disconnect the connector and detach the 2 wire harness clamps. NOTICE: Do not touch the terminal of the kick door control sensor connector. (b) Remove the screw. (c) Remov
© 2016-2026 Copyright www.lexunx.com
