Lexus NX: Before driving
READ NEXT:
The specified procedures should be
observed to ensure safe driving:
Driving procedure
■ Starting the hybrid system
■ Driving
1. With the brake pedal depressed,
shift the shift lever to D.
Take notice of the following information
about storage precautions,
cargo capacity and load.
WARNING
■Things that must not be carried in the
luggage compartment
The following things may cause
Your vehicle is designed primarily
as a passenger-and-load-carrying
vehicle. Towing a trailer can have an
adverse impact on handling, performance,
braking, durability, and
fuel consumption. For y
SEE MORE:
REPAIR CAUTION / NOTICE / HINT HINT:
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
If the installation area of the headlight assembly is damaged, use the supply retainer for low-cost repair.
Make sure that the headlight assembly is not damage
INSPECTION PROCEDURE 1. INSPECT TRIP SWITCH *1 ODO TRIP Switch *a Component without harness connected (Trip Switch) (a) Check the resistance. Measure the resistance according to the value(s) in the table below. Standard Resistance: Tester Connection Switch Condition Specified