Lexus NX: Driving
Lexus NX Owners Manual / Driving
- Before driving
- Driving procedures
- Operating the lights and wipers
- Refueling
- Using the driving support systems
- Lexus Safety System+ 2.0
- PCS (Pre-Collision System)
- LTA (Lane Tracing Assist)
- LDA (Lane Departure Alert with steering control)
- RSA (Road Sign Assist)
- Dynamic radar cruise control with full-speed range
- Intuitive parking assist
- Parking Support Brake function (for static objects)
- BSM (Blind Spot Monitor)
- Driving assist systems
- Driving tips
READ NEXT:
Driving the vehicle
The specified procedures should be
observed to ensure safe driving:
Driving procedure
■ Starting the hybrid system
■ Driving
1. With the brake pedal depressed,
shift the shift lever to D.
Cargo and luggage
Take notice of the following information
about storage precautions,
cargo capacity and load.
WARNING
■Things that must not be carried in the
luggage compartment
The following things may cause
SEE MORE:
Installation
INSTALLATION CAUTION / NOTICE / HINT HINT:
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
PROCEDURE 1. INSTALL REAR DRIVE SHAFT ASSEMBLY LH (a) Align the matchmarks on the rear drive shaft assembly LH and rear axle hub and bearing assembly,
Switch Operation of Remote Touch not Accepted
CAUTION / NOTICE / HINT NOTICE: When replacing the radio receiver assembly, always replace it with a new one. If a radio receiver assembly which was installed to another vehicle is used, the following may occur:
A communication malfunction DTC may be stored.
The radio receiver assembly may not
© 2016-2026 Copyright www.lexunx.com
