Lexus NX: Diagnostic Trouble Code Chart
Lexus NX Service Manual / Vehicle Exterior / Window / Glass / Power Window Control System / Diagnostic Trouble Code Chart
DIAGNOSTIC TROUBLE CODE CHART
Power Window Control System| DTC No. | Detection Item | Link |
|---|---|---|
| B2311 | Power Window Motor Malfunction | |
| B2311 | Power Window Motor Malfunction | |
| B2311 | Power Window Motor Malfunction | |
| B2311 | Power Window Motor Malfunction | |
| B2312 | Power Window Switch Malfunction | |
| B2312 | Power Window Switch Malfunction | |
| B2312 | Power Window Switch Malfunction | |
| B2312 | Power Window Switch Malfunction | |
| B2312 | Power Window Switch Malfunction | |
| B2313 | Glass Position Initialization Incomplete | |
| B2313 | Glass Position Initialization Incomplete | |
| B2313 | Glass Position Initialization Incomplete | |
| B2313 | Glass Position Initialization Incomplete | |
.gif)
READ NEXT:
Power Window Motor Malfunction (B2311)
DESCRIPTION The power window regulator motor assemblies are operated by the multiplex network master switch assembly, power window regulator switch assembly or rear power window regulator switch assem
Power Window Switch Malfunction (B2312)
DESCRIPTION The power window regulator motor assemblies are operated by the multiplex network master switch assembly, power window regulator switch assembly or rear power window regulator switch assem
Glass Position Initialization Incomplete (B2313)
DESCRIPTION The power window regulator motor assemblies are operated by the multiplex network master switch assembly, power window regulator switch assembly or rear power window regulator switch assem
SEE MORE:
Rear Power Window RH Auto Up / Down Function does not Operate with Rear Power Window Switch RH
DESCRIPTION If the manual up and down function operates normally but the auto up and down function does not, then fail-safe mode may be functioning. If power window initialization has not been performed, the auto up and down function will not operate. Click here WIRING DIAGRAM CAUTION / NOTICE /
Inspection
INSPECTION PROCEDURE 1. CHECK BRAKE CYLINDER AND PISTON (a) Check the cylinder bore and piston for rust or scoring. If necessary, replace the disc brake cylinder and piston. 2. CHECK PAD LINING THICKNESS (a) Using a ruler, measure the pad lining thickness. Standard thickness: 10.0 mm (0.394 in.) Mi
© 2016-2025 Copyright www.lexunx.com
