Lexus NX: Dtc Check / Clear
Lexus NX Service Manual / Audio & Visual & Telematics / Audio / Video / Asc System / Dtc Check / Clear
DTC CHECK / CLEAR
DTC CHECK USING Techstream
(a) Connect the Techstream to the DLC3.
(b) Turn the power switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / ASC / Trouble Codes.
(e) Check for DTCs.
Click here
Body Electrical > ASC > Trouble CodesDTC CLEAR USING Techstream
(a) Connect the Techstream to the DLC3.
(b) Turn the power switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / ASC / Trouble Codes.
(e) Clear DTCs.
Click here
Body Electrical > ASC > Clear DTCsREAD NEXT:
Freeze Frame Data
FREEZE FRAME DATA FREEZE FRAME DATA (a) Whenever an ASC system DTC is stored, the stereo component equalizer assembly stores the current vehicle state as freeze frame data. CHECK FREEZE FRAME DATA (a)
Fail-safe Chart
FAIL-SAFE CHART ASC System (a) The stereo component equalizer assembly stores DTCs and freeze frame data and stops sound output if it detects any of the following abnormalities. Item Abnormality
Data List / Active Test
DATA LIST / ACTIVE TEST DATA LIST NOTICE: In the following table, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether
SEE MORE:
Terminals Of Ecu
TERMINALS OF ECU CHECK INSTRUMENT PANEL JUNCTION BLOCK ASSEMBLY AND MAIN BODY ECU (MULTIPLEX NETWORK BODY ECU) *1 Main Body ECU (Multiplex Network Body ECU) - - (a) Remove the main body ECU (multiplex network body ECU) from the instrument panel junction block assembly. Click here (b)
Removal
REMOVAL PROCEDURE 1. REMOVE FRONT WHEEL RH Click here 2. REMOVE FRONT FENDER MOULDING SUB-ASSEMBLY RH HINT: Use the same procedure described for the LH side. Click here 3. REMOVE NO. 1 MOULDING TAPE HINT: Use the same procedure described for the LH side. Click here 4. REMOVE NO. 2 MOULDING TAP
© 2016-2025 Copyright www.lexunx.com
