Lexus NX: Dtc Check / Clear

DTC CHECK / CLEAR

CHECK DTC

(a) Connect the Techstream to the DLC3.

(b) Turn the power switch on (IG).

(c) Turn the Techstream on.

(d) Enter the following menus: Chassis / Panoramic View Monitor / Trouble Codes.

(e) Check the details of the DTCs.

Click here

Chassis > Panoramic View Monitor > Trouble Codes

CLEAR DTC

(a) Connect the Techstream to the DLC3.

(b) Turn the power switch on (IG).

(c) Turn the Techstream on.

(d) Enter the following menus: Chassis / Panoramic View Monitor / Trouble Codes.

(e) According to the display on the Techstream, select the trouble code data display with the clear button.

Chassis > Panoramic View Monitor > Clear DTCs

READ NEXT:

 Data List / Active Test

DATA LIST / ACTIVE TEST DATA LIST HINT: Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. Th

 Diagnostic Trouble Code Chart

DIAGNOSTIC TROUBLE CODE CHART Panoramic View Monitor System DTC No. Detection Item Link C1614 ECU Malfunction C1621 Back Camera Power Supply Failure C1622 Open or Sh

 ECU Malfunction (C1614)

DESCRIPTION This DTC is stored if the parking assist ECU judges that there is an internal malfunction as a result of its self check. HINT: The parking assist ECU stores different types of information

SEE MORE:

 Manual(sos)switch

InspectionINSPECTION PROCEDURE 1. REMOVE MAP LIGHT ASSEMBLY Click here 2. INSPECT MAP LIGHT ASSEMBLY (a) Check the resistance. (1) Measure the resistance according to the value(s) in the table below. *a Component without harness connected (Map Light Assembly) - - Resistance: Test

 Terminals Of Ecu

TERMINALS OF ECU CHECK DCM (TELEMATICS TRANSCEIVER) Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition I183-1 (+B) - I183-20 (E) Y - W-B Power source (+B) Power switch off 11 to 14 V I183-3 (SIG-) - I183-20 (E) G - W-B Ground Alway

© 2016-2026 Copyright www.lexunx.com