Lexus NX: Exhaust Pipe
READ NEXT:
Components
COMPONENTS ILLUSTRATION *1 CENTER EXHAUST PIPE ASSEMBLY *2 EXHAUST PIPE DAMPER *3 FRONT EXHAUST PIPE ASSEMBLY *4 HEATED OXYGEN SENSOR *5 TAIL EXHAUST PIPE ASSEMBLY *6 EXH
Removal
REMOVAL CAUTION / NOTICE / HINT CAUTION:
Wear protective gloves when removing the exhaust pipe assembly.
The exhaust pipe assembly is extremely hot immediately after the engine has stopped.
Con
Installation
INSTALLATION PROCEDURE 1. INSTALL EXHAUST PIPE DAMPER (a) Install the exhaust pipe damper with the 2 bolts. Torque: 19 N·m {194 kgf·cm, 14 ft·lbf} 2. INSTALL HEATED OXYGEN SENSOR Click here 3. I
SEE MORE:
Terminals Of Ecu
TERMINALS OF ECU MOBILE WIRELESS CHARGER CRADLE ASSEMBLY Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition
*1: When the power switch is turned from off to on (ACC), the mobile wireless charger cradle assembly checks the charging stop signal for 1 s
Removal
REMOVAL PROCEDURE 1. REMOVE STEERING PAD Click here 2. REMOVE CRUISE CONTROL MAIN SWITCH Click here 3. REMOVE STEERING PAD SWITCH ASSEMBLY (a) Disconnect the connector from the spiral cable with sensor sub-assembly. (b) Remove the 2 screws. (c) Detach the 3 guide pins and 4 cla
© 2016-2026 Copyright www.lexunx.com
