Lexus NX: Operation Check

OPERATION CHECK

CHECK WINDOW DEFOGGER SYSTEM

(a) Turn the power switch on (IG).

(b) Check that the rear window defogger becomes warm by operating the rear window defogger switch of the air conditioning control assembly.

(c) When the vehicle is stopped, confirm that the rear window defogger stops after approximately 15 minutes.

NOTICE:

If the auxiliary battery voltage becomes low, windshield deicer operation is canceled to prioritize supplying power to the power steering system.

for Power Tilt and Power Telescopic Steering Column: Click here

for Manual Tilt and Manual Telescopic Steering Column: Click here

READ NEXT:

 Problem Symptoms Table

PROBLEM SYMPTOMS TABLE NOTICE: If the auxiliary battery voltage becomes low, windshield deicer operation is canceled to prioritize supplying power to the power steering system. for Power Tilt and Powe

 Data List / Active Test

DATA LIST / ACTIVE TEST HINT: Using the Techstream to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspe

 Rear Window Defogger System does not Operate

DESCRIPTION When the rear window defogger switch on the air conditioning control assembly is pressed, the operation signal is transmitted to the air conditioning amplifier assembly via LIN communicati

SEE MORE:

 Check Mode Procedure

CHECK MODE PROCEDURE NOTICE: Enter "Signal Check" from the "DTC Check" screen displayed on the Techstream to clear the output DTCs (both present and past). HINT: DTCs can be stored more sensitively in check mode than in normal diagnosis mode. Perform the check mode inspection when a malfunction

 Inspection

INSPECTION PROCEDURE 1. INSPECT REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH (a) for Manual Seat: (1) w/o Seat Heater System: Measure the resistance according to the value(s) in the table below. Standard Resistance: Tester Connection Condition Specified Condition 2 (RBR-) - 5 (RBR+)

© 2016-2026 Copyright www.lexunx.com