Lexus NX: Portable Player cannot be Registered
CAUTION / NOTICE / HINT
HINT:
Some versions of "Bluetooth" compatible audio players may not function properly, or the functions may be limited using the radio receiver assembly, even if the portable audio player itself can play files.
Click here .gif)
PROCEDURE
| 1. | CHECK THAT PORTABLE PLAYER IS "Bluetooth" AUDIO COMPATIBLE |
(a) Check if the portable player is "Bluetooth" audio compatible.
| Result | Proceed to |
|---|---|
| The portable player is "Bluetooth" audio compatible. | A |
| The portable player is not "Bluetooth" audio compatible. | B |
| B | .gif) | USE A "Bluetooth" AUDIO COMPATIBLE PORTABLE PLAYER |
|
.gif)
| 2. | CHECK CONNECTION PROCEDURE OF CONNECTED DEVICE |
(a) Referring to the Owner's Manual, correctly register the portable player.
(b) Check that the portable player has been registered as a connected device.
HINT:
The portable player cannot be registered under any of the following conditions:
- The A2DP (Advanced Audio Distribution Profile) is not used when registering a cellular phone.
- A different portable player registration remains in the radio receiver assembly.
- A different radio receiver assembly registration remains in the portable player.
- The portable player is off.
OK:
The portable player has been registered as a connected device.
| OK | | END |
|
| 3. | CHECK USING ANOTHER "Bluetooth" AUDIO COMPATIBLE VEHICLE OF SAME MODEL |
(a) Check if the portable player can be registered normally to another "Bluetooth" audio compatible vehicle of the same model.
OK:
The portable player can be registered.
| NG | | MALFUNCTION IN PORTABLE PLAYER |
|
| 4. | REMOVE ADDITIONAL DEVICES WHICH USE RADIO WAVES |
(a) Remove additional devices which use radio waves.
(b) Place the portable player close to the radio receiver assembly.
(c) Check that the portable player can be registered as a connected device.
OK:
The portable player can be registered.
| OK | | END |
| NG | | PROCEED TO NEXT SUSPECTED AREA SHOWN IN PROBLEM SYMPTOMS TABLE |
READ NEXT:
USB Audio System Recognition/Play Error
DESCRIPTION When a USB device or "iPod" is connected to the USB jack of the No. 1 stereo jack adapter assembly, it must have playable files. The device must also communicate with and be recognized by
Stereo Jack Adapter Light does not Illuminate
DESCRIPTION Power is supplied to the No. 1 stereo jack adapter assembly illumination from the radio receiver assembly. WIRING DIAGRAM CAUTION / NOTICE / HINT NOTICE: When replacing the radio receiver
Remote Touch Screen Does not Generate Vibration Feedback
DESCRIPTION When each button displayed on the multi-display assembly is selected via remote touch screen operation, the remote touch screen generates vibration feedback according to communication betw
SEE MORE:
Removal
REMOVAL CAUTION / NOTICE / HINT HINT:
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
PROCEDURE 1. PRECAUTION Click here 2. REMOVE FRONT DOOR TRIM COVER LH Click here 3. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG LH Click here 4. REMOVE
Back Door Courtesy Switch Circuit
DESCRIPTION The main body ECU (multiplex network body ECU) receives a back door open or closed signal from the back door courtesy light switch. WIRING DIAGRAM CAUTION / NOTICE / HINT NOTICE:
Recognition code registration is necessary when replacing the main body ECU (multiplex network body ECU).
