Lexus NX: Sending Malfunction (Navigation to APGS) (U0073,U0100,U0129,U0140,U0155,U0164,U0198,U023B,U0265,U0293,U1110)

Lexus NX Service Manual / Audio & Visual & Telematics / Audio / Video / Audio And Visual System / Sending Malfunction (Navigation to APGS) (U0073,U0100,U0129,U0140,U0155,U0164,U0198,U023B,U0265,U0293,U1110)

DESCRIPTION

These DTCs are stored when a malfunction occurs in the CAN communication circuit.

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

U0073

Sending Malfunction (Navigation to APGS)

CAN bus connection error

CAN communication system

U0100

Engine ECU Communication

CAN reception error

CAN communication system

U0129

VSC(ECB)ECU Communication

CAN reception error

CAN communication system

U0140

Lost Communication with Body Control Module

CAN reception error

CAN communication system

U0155

Meter ECU Communication

CAN reception error

CAN communication system

U0164

Air Conditioner ECU Communication

CAN reception error

CAN communication system

U0198

Lost Communication with Telematic Control Module

CAN reception error

CAN communication system

U023B

Lost Communication with Image Processing Module "B"

CAN reception error

CAN communication system

U0265

Lost Communication with Image Processing Sensor A

CAN reception error

CAN communication system

U0293

HV ECU Communication

CAN reception error

CAN communication system

U1110

Clearance Sonar ECU Communication

CAN reception error

CAN communication system

PROCEDURE

1.

CHECK DTC (CAN COMMUNICATION SYSTEM)

(a) Clear the DTCs.

Click here

Body Electrical > Navigation System > Clear DTCs

(b) Turn the power switch off.

(c) Turn the power switch on (IG) and wait for 30 seconds.

(d) Recheck for DTCs and check if the same DTC is output again.

Click here

Body Electrical > Navigation System > Trouble Codes

OK:

No DTCs are output.

OK

USE SIMULATION METHOD TO CHECK

NG

GO TO CAN COMMUNICATION SYSTEM

READ NEXT:

 Satellite Radio Broadcast cannot be Received

WIRING DIAGRAM CAUTION / NOTICE / HINT NOTICE: Some satellite radio broadcasts require payment. A contract must be made between a satellite radio company and the user. If the contract expires, it

 Satellite Radio Broadcast cannot be Selected or After Selecting Broadcast, Broadcast cannot be Added into Memory

CAUTION / NOTICE / HINT NOTICE: Some satellite radio broadcasts require payment. A contract must be made between a satellite radio company and the user. If the contract expires, it will not be poss

 Noise Occurs

PROCEDURE 1. CHECK NOISE CONDITION (a) Check from which direction the noise comes (front left or right, or rear left or right). OK: The location of the noise source can be determined. NG

SEE MORE:

 On-vehicle Inspection

ON-VEHICLE INSPECTION CAUTION / NOTICE / HINT CAUTION: Be sure to follow the correct removal and installation procedures of the front seat airbag assemblies. PROCEDURE 1. INSPECT FRONT SEAT AIRBAG ASSEMBLY (for Vehicle not Involved in Collision) (a) Perform a diagnostic system check. Click here (

 Reassembly

REASSEMBLY CAUTION / NOTICE / HINT HINT: Use the same procedure for the RH and LH side. The procedure listed below is for the LH side. A bolt without a torque specification is shown in the standard bolt chart. Click here PROCEDURE 1. REPAIR INSTRUCTION Click here 2. INSTALL NO. 1 BLACK

© 2016-2024 Copyright www.lexunx.com