Lexus NX: System Description
Lexus NX Service Manual / Vehicle Interior / Seat / Climate Control Seat System / System Description
SYSTEM DESCRIPTION
GENERAL
(a) The seat blower has 3 levels, controlled by operating the climate control switch on air conditioning control assembly.
(b) Whether the blower is on or off can be determined by checking if the climate control switch indicator light is on or off.
(c) The blowers of both seats are controlled by the air conditioning amplifier assembly.
READ NEXT:
How To Proceed With Troubleshooting
CAUTION / NOTICE / HINT HINT:
Use this procedure to troubleshoot the climate control seat system.
*: Use the Techstream.
PROCEDURE 1. VEHICLE BROUGHT TO WORKSHOP
NEXT
Operation Check
OPERATION CHECK CHECK AIR DUST (a) Check that there are no cracks or damage on the air ducts of the seat climate control blower and seatback climate control blower, and that the air ducts are installe
Problem Symptoms Table
PROBLEM SYMPTOMS TABLE NOTICE:
If the auxiliary battery voltage is low, the climate control seat system may not operate. When "High Power Consumption Partial Limit On AC/Heater Operation." is displ
SEE MORE:
Parts Location
PARTS LOCATION ILLUSTRATION *1 BACK DOOR OPENER SWITCH ASSEMBLY *2 MULTIPLEX NETWORK DOOR ECU *3 BACK DOOR LOCK ASSEMBLY *4 BACK DOOR LOCK MOTOR *5 LATCH SWITCH *6 PAWL SWITCH *7 BACK DOOR COURTESY SWITCH *8 INITIAL SWITCH ILLUSTRATION *1 ENGINE ROOM
Installation
INSTALLATION CAUTION / NOTICE / HINT HINT:
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
PROCEDURE 1. INSTALL POWER BACK DOOR SENSOR ASSEMBLY LH (a) Attach the 2 clips to install the power back door sensor assembly LH. (b) Install the 4 screws
© 2016-2024 Copyright www.lexunx.com
