Lexus NX: Seat
Lexus NX Service Manual / Vehicle Interior / Seat
- Climate Control Seat System
- Front Power Seat Control System (w/ Memory)
- Front Power Seat Control System(w/o Memory)
- Front Seat Assembly
- Front Seat Cushion Heater
- Front Seatback Heater
- Lumbar Support Adjuster Assembly
- Lumbar Switch
- Power Seat Switch (for Front Seat)
- Power Seat Switch (for Rear Seat)
- Rear Power Seat Control System
- Rear Seat Assembly (for Power Seat)
- Rear Seat Cushion Heater(for Manual Seat)
- Rear Seat Cushion Heater(for Power Seat)
- Rear Seatback Heater(for Manual Seat)
- Rear Seatback Heater(for Power Seat)
- Seat Heater Control (for Front Seat)
- Seat Heater Control(for Rear Seat)
- Seat Heater Switch(for Rear Seat)
- Seat Heater System
- Seat Memory Switch
READ NEXT:
Precaution
PRECAUTION FOR OPERATION OF ELECTRICAL ITEMS RESTRICTED NOTICE:
If the auxiliary battery voltage is low, the climate control seat system may not operate. When "High Power Consumption / Partial Limi
Parts Location
PARTS LOCATION ILLUSTRATION *1 COMBINATION METER ASSEMBLY *2 CLIMATE CONTROL SWITCH (for Driver Side) *3 CLIMATE CONTROL SWITCH (for Front Passenger Side) *4 AIR CONDITIONING CONTR
SEE MORE:
Power Back Door Main Switch
InspectionINSPECTION PROCEDURE 1. INSPECT POWER BACK DOOR MAIN SWITCH (a) Check the resistance. (1) Measure the resistance according to the value(s) in the table below. Standard Resistance: Tester Connection Switch Condition Specified Condition 16 (L) - 6 (B) Switch off 10 kΩ or
SLA Linear Solenoid (C1211,C1212,C1225-C1228,C1352,C1353,C1356,C1357)
DESCRIPTION Each solenoid adjusts pressure which affects each wheel cylinder according to signals from the skid control ECU (brake booster with master cylinder assembly) and controls the vehicle. The master cut solenoid is closed and blocks the regulator pressure from the electronically controlled b
© 2016-2024 Copyright www.lexunx.com
