Lexus NX: Adjusting the steering wheel and mirrors
Lexus NX Owners Manual / Before driving / Adjusting the steering wheel and mirrors
READ NEXT:
Steering wheel
Adjustment procedure
Manual type
1. Hold the steering wheel and push
the lever down.
2. Adjust to the ideal position by moving
the steering wheel horizontally
and vertically.
After adjustme
Inside rear view mirror
The rear view mirror's position can
be adjusted to enable sufficient
confirmation of the rear view.
Adjusting the height of rear view
mirror
The height of the rear view mirror can
be adjusted to
Outside rear view mirrors
For safe driving, adjust the mirror
angles to secure visibility before
driving.
WARNING
■When driving the vehicle
Observe the following precautions while
driving.
Failure to do so may resul
SEE MORE:
Inspection
INSPECTION PROCEDURE 1. CHECK BRAKE CYLINDER AND PISTON (a) Check the cylinder bore and piston for rust or scoring. If necessary, replace the brake cylinder and piston. 2. CHECK PAD LINING THICKNESS (a) Using a ruler, measure the pad lining thickness. Standard thickness: 12.0 mm (0.472 in.) Minimum
Installation
INSTALLATION CAUTION / NOTICE / HINT NOTICE: When replacing the combination meter assembly, make sure to replace it with a new one. PROCEDURE 1. INSTALL COMBINATION METER ASSEMBLY (a) Connect the connectors and attach the clamp. *a Screw (b) Install the combination meter a
© 2016-2026 Copyright www.lexunx.com
