Lexus NX: Data List / Active Test
DATA LIST / ACTIVE TEST
DATA LIST
HINT:
Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.
NOTICE:
In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.
(a) Connect the Techstream to the DLC3.
(b) Turn the power switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Main Body or Smart Access / Data List.
(e) Read the Data List according to the display on the Techstream.
Body Electrical > Main Body > Data List| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| ACC SW | Power switch on (ACC) signal | OFF or ON | OFF: Power switch off ON: Power switch on (ACC) | "ON" is also displayed for this item when the power switch is on (IG). |
| IG SW | Power switch on (IG) signal | OFF or ON | OFF: Power switch off or on (ACC) ON: Power switch on (IG) | "OFF" is also displayed for this item when the power switch is on (ACC). |
| RR Door Courtesy SW | Rear door courtesy light switch RH signal | OFF or ON | OFF: Rear door RH closed ON: Rear door RH open | - |
| RL Door Courtesy SW | Rear door courtesy light switch LH signal | OFF or ON | OFF: Rear door LH closed ON: Rear door LH open | - |
| Back Door Courtesy SW | Back door courtesy light switch signal | OFF or ON | ON: Back door open OFF: Back door closed | - |
| FR Door Lock Pos | Front door RH unlock detection switch signal | LOCK or UNLOCK | LOCK: Front door RH locked UNLOCK: Front door RH unlocked | - |
| FR Door Courtesy SW | Front door courtesy light switch RH signal | OFF or ON | OFF: Front door RH closed ON: Front door RH open | - |
| FL Door Lock Pos | Front door LH unlock detection switch signal | LOCK or UNLOCK | LOCK: Front door LH locked UNLOCK: Front door LH unlocked | - |
| FL Door Courtesy SW | Front door courtesy light switch LH signal | OFF or ON | OFF: Front door LH closed ON: Front door LH open | - |
| RR-Door Lock Pos SW | Rear door RH unlock detection switch signal | OFF or ON | OFF: Rear door RH locked ON: Rear door RH unlocked | - |
| RL-Door Lock Pos SW | Rear door LH unlock detection switch signal | OFF or ON | OFF: Rear door LH locked ON: Rear door LH unlocked | - |
| Wireless Control | Wireless door lock control function | OFF or ON | Customization status displayed | - |
| Hazard Answer Back | Hazard answer-back of wireless function | OFF or ON | Customization status displayed | - |
| Open Door Warning | Open door warning | OFF or ON | Customization status displayed | - |
| Unlock 2 Operation | 2 times operation of wireless unlock | OFF or ON | Customization status displayed | - |
| Panic Function | Panic function | OFF or ON | Customization status displayed | - |
| Auto Lock Time | Automatic lock time | 30 s, 60 s or 120 s | Customization status displayed | - |
| Wirelss Buzzer Resp | Buzzer answer-back of wireless | OFF or ON | Customization status displayed | - |
| P/W Wireless Ope Buzz | Buzzer sounds of wireless power window | OFF or ON | Customization status displayed | - |
| Wireless Buzzer Vol | Wireless door lock buzzer volume | Level7, Level6, Level5, Level4, Level3, Level2, Level1 or Level0 | Customization status displayed | - |
| Tester Display | Measurement Item | Range | Normal Condition | Diagnostic Note |
|---|---|---|---|---|
| # Codes | Number of DTCs | 0 to 255 | Number of stored DTCs | - |
ACTIVE TEST
HINT:
Using the Techstream to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.
(a) Connect the Techstream to the DLC3.
(b) Turn the power switch on (IG).
(c) Turn the Techstream on.
(d) Enter the following menus: Body Electrical / Main Body / Active Test.
(e) Perform the Active Test according to the display on the Techstream.
Body Electrical > Main Body > Active Test| Tester Display | Measurement Item | Control Range | Diagnostic Note |
|---|---|---|---|
| Door Lock | Door lock motor | OFF/Unlock/Lock | - |
| D-Door Unlock | Door lock motor | OFF/Unlock/Lock | - |
| Trunk and Back-Door Open | Back door lock motor | OFF/ON | - |
| Wireless Buzzer | Wireless door lock buzzer | OFF/ON | - |
READ NEXT:
Diagnostic Trouble Code Chart
DIAGNOSTIC TROUBLE CODE CHART Wireless Door Lock Control System DTC No. Detection Item Link B1242 Wireless Door Lock Tuner Circuit Malfunction
Wireless Door Lock Tuner Circuit Malfunction (B1242)
DESCRIPTION The door control receiver is used to receive radio waves related to the entry functions of the electrical key transmitter sub-assembly. The certification ECU (smart key ECU assembly) decod
No Answer-Back
DESCRIPTION In some cases, wireless door lock control functions are normal but the hazard warning light and/or wireless door lock buzzer answer-back function does not operate. In such cases, hazard wa
SEE MORE:
Front Lower Suspension Arm
ComponentsCOMPONENTS ILLUSTRATION *1 FRONT LOWER NO. 1 SUSPENSION ARM SUB-ASSEMBLY LH *2 FRONT SUSPENSION CROSSMEMBER SUB-ASSEMBLY N*m (kgf*cm, ft.*lbf): Specified torque * For use with SST RemovalREMOVAL CAUTION / NOTICE / HINT HINT:
Use the same procedure for the RH an
Lexus Enform Remote
Lexus Enform Remote is a cellular
phone application that lets you view
and remotely control certain
aspects of your vehicle.
For details about the functions and
services of this application, refer to
http://www.lexus.com/enform/.
Function of the Lexus Enform
Remote is achieved by using a
