Lexus NX: Diagnostic Trouble Code Chart
Lexus NX Service Manual / Engine & Hybrid System / Cruise Control / Road Sign Assist System / Diagnostic Trouble Code Chart
DIAGNOSTIC TROUBLE CODE CHART
Road Sign Assist System| DTC No. | Detection Item | Link |
|---|---|---|
| U012587 | Lost Communication with Multi-axis Acceleration Sensor Module Missing Message | |
| U012987 | Lost Communication with Brake System Control Module Missing Message | |
| U014087 | Lost Communication with Body Control Module Missing Message | |
| U015587 | Lost Communication with Instrument Panel Cluster (IPC) Control Module Missing Message | |
| U029387 | Lost Communication with Hybrid Powertrain Control Module Missing Message | |
.gif)
READ NEXT:
Vehicle Control History
VEHICLE CONTROL HISTORY NOTICE: Make sure to record any output Vehicle Control History codes before clearing them and checking the Vehicle Control History again. CHECK VEHICLE CONTROL HISTORY (ROAD SI
Lost Communication with Multi-axis Acceleration Sensor Module Missing Message (U012587,U012987,U014087,U015587,U029387)
DESCRIPTION When a malfunction is detected between various ECUs and sensors, these DTCs are stored. DTC No. Detection Item DTC Detection Condition Trouble Area U012587 Lost Communicatio
SEE MORE:
Installation
INSTALLATION CAUTION / NOTICE / HINT HINT:
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
PROCEDURE 1. INSTALL REAR DRIVE SHAFT ASSEMBLY LH (a) Align the matchmarks on the rear drive shaft assembly LH and rear axle hub and bearing assembly,
Lost Communication with Haptic Device (B1323-B1326)
DESCRIPTION These DTCs are stored when communication between the radio receiver assembly and remote operation controller assembly (remote touch), combination meter assembly, combination meter mirror ECU* or clock assembly is not possible.
*: w/ Headup Display
DTC No. Detection Item DTC
© 2016-2024 Copyright www.lexunx.com
