Lexus NX: Diagnostic Trouble Code Chart

DIAGNOSTIC TROUBLE CODE CHART

ASC System

DTC No.

Detection Item

Link

B1360

Speaker Circuit

B1361

Volume Switch Circuit

B1362

ECU Malfunction

U0129

Lost Communication with Brake System Control Module

U0142

Lost Communication with Body Control Module "B"

U0293

Lost Communication With Hybrid Powertrain Control Module

READ NEXT:

 Speaker Circuit (B1360)

DESCRIPTION This DTC is stored when a connection malfunction, such as an open, is detected in the wire harness between the stereo component equalizer assembly and No. 1 speaker assembly with box. D

 Volume Switch Circuit (B1361)

DESCRIPTION The stereo component equalizer assembly adjusts sound volume based on the signal sent by the vehicle sound switch. DTC No. Detection Item DTC Detection Condition Trouble Area

 ECU Malfunction (B1362)

DESCRIPTION This DTC is stored when the stereo component equalizer assembly detects an internal malfunction. DTC No. Detection Item DTC Detection Condition Trouble Area B1362 ECU Malfun

SEE MORE:

 Dtc Check / Clear

DTC CHECK / CLEAR CHECK FOR DTC (a) Connect the Techstream to the DLC3. (b) Turn the power switch on (IG). (c) Turn the Techstream on. (d) Enter the following menus: Body Electrical / Central Gateway / Trouble Codes. Body Electrical > Central Gateway > Trouble Codes (e) Read the DTCs. CLEAR DT

 Blind Spot Monitor Sensor Communication Stop Mode

DESCRIPTION Detection Item Symptom Trouble Area Blind Spot Monitor Sensor Communication Stop Mode Any of the following conditions are met: Communication stop for "Blind Spot Monitor Master" is indicated on the "Communication Bus Check" screen of the Techstream. Click here Commu

© 2016-2026 Copyright www.lexunx.com