Lexus NX: ECU Malfunction (B1362)

DESCRIPTION

This DTC is stored when the stereo component equalizer assembly detects an internal malfunction.

DTC No.

Detection Item

DTC Detection Condition

Trouble Area

B1362

ECU Malfunction

An internal malfunction occurs in the stereo component equalizer assembly

Stereo component equalizer assembly

PROCEDURE

1.

CHECK FOR DTC

(a) Clear the DTCs.

Click here

Body Electrical > ASC > Clear DTCs

(b) Check for DTCs.

Click here

Body Electrical > ASC > Trouble Codes

OK:

DTC B1362 is not output.

OK

USE SIMULATION METHOD TO CHECK

NG

REPLACE STEREO COMPONENT EQUALIZER ASSEMBLY

READ NEXT:

 Lost Communication with Brake System Control Module (U0129,U0142,U0293)

DESCRIPTION DTC No. Detection Item DTC Detection Condition Trouble Area U0129 Lost Communication with Brake System Control Module No communication with brake booster with master cylin

 Main Switch Circuit

DESCRIPTION The stereo component equalizer assembly detects vehicle sound switch signals. The ASC system can be turned on and off by operating the vehicle sound switch. WIRING DIAGRAM CAUTION / NOTIC

 Power Source Circuit

DESCRIPTION This circuit is the power source circuit for the stereo component equalizer assembly. WIRING DIAGRAM CAUTION / NOTICE / HINT NOTICE: Inspect the fuses for circuits related to this system

SEE MORE:

 Parts Location

PARTS LOCATION ILLUSTRATION *1 OUTER REAR VIEW MIRROR ASSEMBLY LH *2 OUTER REAR VIEW MIRROR ASSEMBLY RH *3 OUTER MIRROR LH *4 OUTER MIRROR RH *5 NO. 2 ENGINE ROOM RELAY BLOCK - DEF RELAY - ECU-B NO.2 FUSE - DEF FUSE - MIR HTR FUSE - MIRROR FUSE *6 FUSE BLOCK ASSEMBLY -

 Telematics Transceiver Disconnected (B15DB)

DESCRIPTION If the radio receiver assembly cannot detect the DCM (telematics transceiver) for a certain period of time (90 seconds) after the power switch is turned on (IG) and the radio receiver assembly confirms that the information is missing by checking past DCM (telematics transceiver) recognit

© 2016-2026 Copyright www.lexunx.com