Lexus NX: Fail-safe Chart
Lexus NX Service Manual / Engine & Hybrid System / Cruise Control / Front Camera System / Fail-safe Chart
FAIL-SAFE CHART
FRONT CAMERA SYSTEM FAIL-SAFE CHART
(a) When a malfunction occurs in the front camera system, a message is displayed on the multi-information display and control is canceled in accordance with the malfunction.
READ NEXT:
Data List / Active Test
DATA LIST / ACTIVE TEST DATA LIST HINT: Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. Th
Diagnostic Trouble Code Chart
DIAGNOSTIC TROUBLE CODE CHART Front Camera System DTC No. Detection Item Link C10001C Control Module Internal Temperature Sensor "A" Circuit Circuit Voltage Out of Range C10051C
Vehicle Control History
VEHICLE CONTROL HISTORY NOTICE: When checking the vehicle control history, first record the output codes and after clearing the history, check the output history again. CHECK VEHICLE CONTROL HISTORY (
SEE MORE:
Installation
INSTALLATION PROCEDURE 1. INSTALL AIRBAG ECU ASSEMBLY (a) Check that the power switch is off. (b) Check that the cable is disconnected from the negative (-) auxiliary battery terminal. CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) auxiliary battery terminal to
Removal
REMOVAL CAUTION / NOTICE / HINT HINT:
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
PROCEDURE 1. REMOVE SIDE MUDGUARD SUB-ASSEMBLY LH HINT: When removing the side mudguard sub-assembly LH, if the No. 3 moulding tape (double-sided tape) is diff
© 2016-2025 Copyright www.lexunx.com
