Lexus NX: Oil And Oil Filter
READ NEXT:
Components
COMPONENTS ILLUSTRATION *1 OIL FILTER CAP ASSEMBLY *2 O-RING *3 GASKET *4 OIL PAN DRAIN PLUG *5 OIL FILTER ELEMENT *6 OIL FILTER DRAIN PLUG *7 OIL FILLER CAP -
Replacement
REPLACEMENT CAUTION / NOTICE / HINT CAUTION:
Prolonged and repeated contact with engine oil will result in the removal of natural oils from the skin, leading to dryness, irritation and dermatitis.
Oil Pressure Switch
ComponentsCOMPONENTS ILLUSTRATION *1 ENGINE OIL PRESSURE SWITCH ASSEMBLY - - N*m (kgf*cm, ft.*lbf): Specified torque TOYOTA Genuine Adhesive 1344, Three Bond 1344 or equivalent.
SEE MORE:
Installation
INSTALLATION CAUTION / NOTICE / HINT HINT:
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
PROCEDURE 1. INSTALL REAR NO. 1 SPRING BUMPER LH (a) Using SST, install the rear No. 1 spring bumper LH. SST: 09922-10010 Torque: Specified tightening
Removal
REMOVAL CAUTION / NOTICE / HINT NOTICE:
When the brake pedal is first depressed after replacing the brake pads or pushing back the disc brake piston, DTC C1214 may be output. As there is no malfunction, clear the DTC.
While the auxiliary battery is connected, even if the power switch is off, th
© 2016-2026 Copyright www.lexunx.com
