Lexus NX: Precaution
PRECAUTION
PRECAUTIONS FOR VEHICLE PROXIMITY NOTIFICATION SYSTEM
(a) In the following cases, the volume or tone of the sound might change:
(1) If the vehicle is parked in a very hot or cold environment for an extended time (function will return to normal after time passes)
(2) If high pressure water is applied directly to the speaker from the bottom of the vehicle
(3) If the front of the speaker is blocked by mud, snow, ice, etc.
(4) If the entire speaker freezes
(b) In the following cases, it may be difficult to hear the sound from the speaker:
(1) If the environment around the vehicle is very noisy (in a busy intersection or when an emergency vehicle is approaching)
(2) If the listener is behind the vehicle. (Compared to a situation such as when a pedestrian is in front of the vehicle, the sound volume will seem to be lower when the car is driven in reverse. This occurs because the speaker is installed facing the front of the vehicle.)
READ NEXT:
Parts Location
PARTS LOCATION ILLUSTRATION *1 VEHICLE APPROACHING SPEAKER ASSEMBLY *2 VEHICLE APPROACHING SPEAKER CONTROLLER *3 HYBRID VEHICLE CONTROL ECU *4 INSTRUMENT PANEL JUNCTION BLOCK ASSEM
System Diagram
SYSTEM DIAGRAM
System Description
SYSTEM DESCRIPTION Vehicle Proximity Notification System (a) When the vehicle is being driven quietly using the motor only, the vehicle proximity notification system outputs a warning sound from the v
SEE MORE:
Diagnosis System
DIAGNOSIS SYSTEM CHECK DLC3 (a) Check the DLC3. Click here INSPECT AUXILIARY BATTERY VOLTAGE (a) Measure the auxiliary battery voltage with the power switch off. Standard voltage: 11 to 14 V If the voltage is below 11 V, recharge or replace the auxiliary battery.
Relay
On-vehicle InspectionON-VEHICLE INSPECTION PROCEDURE 1. INSPECT IGNITION CONTROL RELAY (IGCT) (a) Measure the resistance according to the value(s) in the table below. Standard Resistance: Tester Connection Condition Specified Condition 3 - 5 Auxiliary battery voltage is not applied
