Lexus NX: Precaution
PRECAUTION
POWER FOLDING SEAT FUNCTION HANDLING PRECAUTIONS
NOTICE:
- When operating the rear power seat, make sure nothing is in the path of movement.
- When operating the rear power seat, do not allow body parts or foreign objects to interfere with the seat or other components as injuries or damage to components may result.
- When the rear power seat is operated by the rear power seat switch, No. 1 fold seat switch assembly or No. 2 fold seat switch assembly and a jam is detected between the seat cushion and seatback, the rear power seat stops moving and the buzzer sounds.
- When the fold seat control ECU is replaced, initialization must be performed. If initialization is not performed, the fold operation, return operation, reclining operation and jam protection function do not operate.
READ NEXT:
Parts Location
PARTS LOCATION ILLUSTRATION *1 REAR POWER SEAT SWITCH (REAR RIGHT SEAT) *2 REAR POWER SEAT SWITCH (REAR LEFT SEAT) *3 NO. 2 FOLD SEAT SWITCH ASSEMBLY *4 REAR SEATBACK FRAME SUB-ASS
System Diagram
SYSTEM DIAGRAM
System Description
SYSTEM DESCRIPTION REAR POWER SEAT CONTROL SYSTEM DESCRIPTION
This system has the following functions: reclining, folding and return, and jam protection.
Both the left and right seats are equippe
SEE MORE:
Generator Inverter Performance (P0A7A-325,P0A7A-810)
DTC SUMMARY MALFUNCTION DESCRIPTION These DTCs indicate that a large current flowed in the inverter for the generator. The cause of this malfunction may be one of the following: Internal inverter malfunction
Internal circuit malfunction in the inverter for the generator
Malfunction in the senso
On-vehicle Inspection
ON-VEHICLE INSPECTION PROCEDURE 1. INSPECT RESERVOIR CAP (a) Measure the valve opening pressure. *a O-Ring *b Rubber Packing (1) If there are water stains or foreign matter on the O-ring, clean it with water and finger scouring. (2) Check that the O-ring is not deformed, cracked or sw
© 2016-2026 Copyright www.lexunx.com
