Lexus NX: System Diagram
Lexus NX Service Manual / Vehicle Exterior / Mirror (ext) / Power Mirror Control System (w/o Memory) / System Diagram
SYSTEM DIAGRAM
Power Mirror Control System
Mirror Heater System
READ NEXT:
System Description
SYSTEM DESCRIPTION FUNCTION OF MAIN COMPONENT Component Function Outer rear view mirror assembly Vertical mirror motor Moves the mirror surface vertically in accordance with the vertical
How To Proceed With Troubleshooting
CAUTION / NOTICE / HINT HINT:
Use the following procedure to troubleshoot the power mirror control system.
*: Use the Techstream.
PROCEDURE 1. VEHICLE BROUGHT TO WORKSHOP
NEXT
Operation Check
OPERATION CHECK CHECK POWER RETRACTABLE MIRROR FUNCTION (a) Turn the power switch on (ACC). (b) When the outer rear view mirror assembly LH and outer rear view mirror assembly RH are in the driving po
SEE MORE:
Crankshaft Position - Camshaft Position Correlation (Bank 1 Sensor A) (P0016)
DESCRIPTION In the VVT (Variable Valve Timing) system, the appropriate intake valve open and close timing is controlled by the ECM. The ECM performs intake valve control by performing the following: 1) controlling the intake camshaft and camshaft timing oil control valve assembly, and operating the
Terminals Of Ecu
TERMINALS OF ECU REAR TELEVISION CAMERA ASSEMBLY (a) Disconnect the Y25 rear television camera assembly connector. (b) Measure the voltage on the wire harness side connector according to the value(s) in the table below. Terminal No. (Symbol) Wiring Color Terminal Description Condition Sp
© 2016-2025 Copyright www.lexunx.com
