Lexus NX: Vehicle Control History
Lexus NX Service Manual / Audio & Visual & Telematics / Park Assist / Monitoring / Intelligent Clearance Sonar System / Vehicle Control History
VEHICLE CONTROL HISTORY
Vehicle Control History
HINT:
Part of the control history can be confirmed using the vehicle control history.
Click here .gif)
READ NEXT:
ECU Malfunction (C1611)
DESCRIPTION If the clearance warning ECU assembly detects an internal malfunction during self-diagnosis, DTC C1611 is stored. DTC No. Detection Item DTC Detection Condition Trouble Area C
Steering Angle Sensor Failure (C1626)
DESCRIPTION This DTC is stored if the clearance warning ECU assembly receives a signal via CAN communication from the steering sensor that indicates an internal malfunction. DTC No. Detection Ite
G Sensor Failure (C1647)
DESCRIPTION The clearance warning sonar ECU assembly communicates with the airbag ECU assembly (yaw rate and acceleration sensor) via CAN communication, and if it is determined that the airbag ECU ass
SEE MORE:
Installation
INSTALLATION PROCEDURE 1. INSTALL IGNITION COIL ASSEMBLY Click here 2. INSTALL SENSOR WIRE (a) Install the sensor wire with the bolt. Torque: 21 N·m {214 kgf·cm, 15 ft·lbf} (b) Connect the knock control sensor connector. 3. INSTALL INJECTOR VIBRATION INSULATOR Click here 4. INSTALL FUEL DELI
Exhaust Gas Recirculation Control Circuit (P0403)
DESCRIPTION Refer to DTC P0401. Click here DTC No. Detection Item DTC Detection Condition Trouble Area MIL Memory P0403 Exhaust Gas Recirculation Control Circuit Both of the following conditions are met: (1 trip detection logic)
(a) The engine is running.
(b) Any of the
© 2016-2025 Copyright www.lexunx.com
