Lexus NX: A/C Inverter High Voltage Output System Malfunction (B1472)
DESCRIPTION
The inverter in the compressor with motor assembly outputs high-voltage to operate the motor. If there is an open or short in the output circuit, the hybrid vehicle control ECU will stop compressor operation and store this DTC. This DTC will be stored as a history DTC. The compressor operation remains stopped until both the history and current DTCs are cleared.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | Memory | Note |
|---|---|---|---|---|---|
| B1472 | A/C Inverter High Voltage Output System Malfunction | Open or short in A/C inverter high voltage output system |
| Memorized | - |
CAUTION / NOTICE / HINT
CAUTION:
- Wear insulated gloves and pull out the service plug grip before inspection as procedures may require disconnecting high-voltage connectors. Carry the removed service plug in your pocket to prevent other technicians from accidentally reconnecting it while you are servicing the vehicle.
- Do not touch the high-voltage connectors or terminals for 10 minutes after the service plug grip is removed.
NOTICE:
-
After the power switch is turned off, there may be a waiting time before disconnecting the negative (-) auxiliary battery terminal.
Click here
.gif)
-
When disconnecting and reconnecting the auxiliary battery terminal
Click here
HINT:
When disconnecting and reconnecting the auxiliary battery, there is an automatic learning function that completes learning when the respective system is used.
Click here
- The hybrid control system and air conditioning system output DTCs separately. Perform troubleshooting for the hybrid control system first if DTCs from these systems are output simultaneously.
PROCEDURE
| 1. | CHECK CAN COMMUNICATION SYSTEM |
(a) Using the Techstream, check if the CAN communication system is functioning normally.
Click here
| Result | Proceed to |
|---|---|
| CAN communication system DTCs are not output | A |
| CAN communication system DTCs are output | B |
| A | .gif) | REPLACE COMPRESSOR WITH MOTOR ASSEMBLY |
| B | | GO TO CAN COMMUNICATION SYSTEM |
READ NEXT:
A/C Inverter Start-up Signal System Malfunction (B1473)
DESCRIPTION The inverter activation signal is sent to the compressor with motor assembly from the hybrid vehicle control ECU. Compressor control is stopped and this DTC is stored if there is an open o
A/C Inverter Malfunction (B1474)
DESCRIPTION DTC No. Detection Item DTC Detection Condition Trouble Area Memory Note B1474 A/C Inverter Malfunction A/C inverter malfunction
Compressor with motor assembly
C
A/C Inverter Cooling / Heating System Malfunction (B1475)
DESCRIPTION The temperature sensor of the compressor with motor assembly detects the A/C inverter temperature. If the temperature exceeds the maximum, operation of the compressor with motor assembly w
SEE MORE:
USB Audio System Recognition/Play Error
DESCRIPTION When a USB device or "iPod" is connected to the USB jack of the No. 1 stereo jack adapter assembly, it must have playable files. The device must also communicate with and be recognized by the radio receiver assembly. This diagnosis procedure is for when a device is not recognized, or fil
AUTO Power Retract Mirrors do not operate
DESCRIPTION The outer mirror switch assembly (mirror retract switch) sends the auto retractable outer mirror switch signal to the main body ECU (multiplex network body ECU). The main body ECU (multiplex network body ECU) sends the auto retract/return signal to the outer rear view mirror assemblies,
