Lexus NX: Before driving
Observe the following before starting
off in the vehicle to ensure
safety of driving.
Installing floor mats
Use only floor mats designed specifically
for vehicles of the same model
and model year as your vehicle. Fix
them securely in place onto the carpet.
1. Insert the retaining hooks (clips)
into the floor mat eyelets.

2. Turn the upper knob of each retaining
hook (clip) to secure the floor
mats in place.

- Always align
the marks.
The shape of the retaining hooks (clips)
may differ from that shown in the illustration.
WARNING
Observe the following precautions.
Failure to do so may cause the driver's
floor mat to slip, possibly interfering with
the pedals while driving. An unexpectedly
high speed may result or it may
become difficult to stop the vehicle. This
could lead to an accident, resulting in
death or serious injury.
■When installing the driver's floor mat
- Do not use floor mats designed for
other models or different model year
vehicles, even if they are Lexus Genuine
floor mats.
- Only use floor mats designed for the
driver's seat.
- Always install the floor mat securely
using the retaining hooks (clips) provided.
- Do not use two or more floor mats on
top of each other.
- Do not place the floor mat bottomside
up or upside-down.
■Before driving
- Check that the floor mat is securely
fixed in the correct place with all the
provided retaining hooks (clips). Be
especially careful to perform this
check after cleaning the floor.

- With the hybrid system stopped and
the shift lever in P, fully depress each
pedal to the floor to make sure it does
not interfere with the floor mat.
READ NEXT:
For safe driving, adjust the seat and
mirror to an appropriate position
before driving.
Correct driving posture
Adjust the angle of the seatback so
that you are sitting straight up and
so
Make sure that all occupants are
wearing their seat belts before driving
the vehicle.
WARNING
Observe the following precautions to
reduce the risk of injury in the event of
sudden braking, sudde
The SRS airbags inflate when the vehicle is subjected to certain types
of
severe impacts that may cause significant injury to the occupants. They work
together with the seat belts to help reduce t
SEE MORE:
DESCRIPTION After power switch on (IG), the DCM (telematics transceiver) will enter into self check mode. The manual (SOS) switch red indicator will illuminate for 2 seconds and turn off followed by the manual (SOS) switch green indicator illuminating and remaining on under normal operation. If neit
DATA LIST / ACTIVE TEST DATA LIST NOTICE: In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not. HINT: Using the Techstream to read the Data List allows the values or states of
© 2016-2026 Copyright www.lexunx.com
