Lexus NX: Brake Fluid

READ NEXT:

 On-vehicle Inspection

ON-VEHICLE INSPECTION CAUTION / NOTICE / HINT NOTICE: If using a dropper to adjust the fluid amount, make sure that the dropper has not been used with mineral oils, water or deteriorated brake fluid.

 Replacement

REPLACEMENT CAUTION / NOTICE / HINT HINT: There are 2 methods for brake fluid replacement: using the Techstream or not using the Techstream. NOTICE: Perform fluid replacement with park (P) selected

 Bleeding

BLEEDING CAUTION / NOTICE / HINT CAUTION: The Techstream must be used for air bleeding. If not used, the air bleeding will be incomplete, which is hazardous and may lead to an accident. NOTICE: Per

SEE MORE:

 Power Mirror Surface Position is not Memorized

DESCRIPTION When the seat memory switch is operated, the switch input signal is sent via CAN communication from the outer mirror control ECU assembly LH to the main body ECU (multiplex network body ECU). The main body ECU (multiplex network body ECU) then sends the memorization request or recall req

 Reassembly

REASSEMBLY CAUTION / NOTICE / HINT HINT: Use the same procedure for the RH and LH sides. The procedure listed below is for the LH side. PROCEDURE 1. INSTALL FRONT TURN SIGNAL LIGHT BULB (a) Install the front turn signal light bulb to the bulb socket. (b) Align the matchmark of the bulb socke

© 2016-2024 Copyright www.lexunx.com