Lexus NX: Brake System (other)
Lexus NX Service Manual / Brake / Brake System (other)
READ NEXT:
Components
COMPONENTS ILLUSTRATION -
*A w/ Damper - - *1 SUSPENSION TOWER DAMPER - - N*m (kgf*cm, ft.*lbf): Specified torque - - ILLUSTRATION w/ Damper
*A w/o Damper -
Removal
REMOVAL PROCEDURE 1. PRECAUTION CAUTION: Be sure to read Precoution thoroughly before serving. Click here NOTICE: After turning the power switch off, there may be a waiting time before disconnecting
SEE MORE:
Installation
INSTALLATION CAUTION / NOTICE / HINT NOTICE:
When replacing with a new inverter with converter assembly, securely lock the retainer of the inverter cooling hose since it is not locked.
Before replacing the wire harness boot, check if any DTCs are output.
HINT: Remove the tape that was attach
Dtc Check / Clear
DTC CHECK / CLEAR CHECK DTC (USING THE Techstream) (a) Turn the power switch off. (b) Connect the Techstream to the DLC3. (c) Turn the power switch on (IG). (d) Turn the Techstream on. (e) Enter the following menus: Chassis / EMPS / Trouble Codes. Chassis > EMPS > Trouble Codes (f) Read the DT
© 2016-2026 Copyright www.lexunx.com
