Lexus NX manuals

Lexus NX: Components

Lexus NX Service Manual / Engine & Hybrid System / 2ar-fxe (hybrid / Battery Control) / Battery Voltage Sensor / Components

COMPONENTS

ILLUSTRATION

*1

BATTERY VOLTAGE SENSOR

*2

LOWER NO. 2 HYBRID BATTERY CARRIER PATCH

N*m (kgf*cm, ft.*lbf) : Specified torque

-

-

READ NEXT:

 Removal

REMOVAL CAUTION / NOTICE / HINT NOTICE: The type of battery voltage sensor to be used varies depending on the vehicle model. If the wrong type of battery voltage sensor is installed, the power sw

 Installation

INSTALLATION CAUTION / NOTICE / HINT NOTICE: The type of battery voltage sensor to be used varies depending on the vehicle model. If the wrong type of battery voltage sensor is installed, the pow

 Coolant (for Inverter)

SEE MORE:

 On-vehicle Inspection

ON-VEHICLE INSPECTION PROCEDURE 1. INSPECT HOOD SUB-ASSEMBLY (a) Check that the clearance measurements of areas A to E are within the standard ranges. Standard Clearance: Area Specified Condition Area Specified Condition A 2.45 to 6.45 mm (0.0965 to 0.2539 in.) B 3.7 to 6.7 mm (

 Front Passenger Side Power Mirror cannot be Adjusted with Power Mirror Switch

DESCRIPTION When the outer mirror switch assembly mirror surface adjust switch (up/down/left/right) is operated, up/down/left/right signals are received by the main body ECU (multiplex network body ECU). The main body ECU (multiplex network body ECU) sends the received signals to the outer mirror co

© 2016-2026 Copyright www.lexunx.com