Lexus NX: Components
COMPONENTS
ILLUSTRATION
| *1 | TRANSMITTER BATTERY | *2 | DOOR CONTROL TRANSMITTER HOUSING SET |
| *3 | TRANSMITTER BATTERY HOLDER | *4 | MECHANICAL KEY |
| *5 | ELECTRICAL TRANSMITTER SUB-ASSEMBLY | - | - |
ILLUSTRATION
| *1 | TRANSMITTER (CARD KEY) BATTERY | *2 | TRANSMITTER BATTERY HOUSING COVER |
| *3 | CARD KEY ELECTRICAL TRANSMITTER SUB-ASSEMBLY | - | - |
READ NEXT:
Removal
REMOVAL PROCEDURE 1. REMOVE TRANSMITTER BATTERY Click here 2. REMOVE TRANSMITTER (CARD KEY) BATTERY Click here
Inspection
INSPECTION PROCEDURE 1. INSPECT ELECTRICAL KEY TRANSMITTER SUB-ASSEMBLY NOTICE: When replacing the transmitter battery, before starting work, remove static electricity that has built up in the body by
Installation
INSTALLATION PROCEDURE 1. INSTALL TRANSMITTER BATTERY Click here 2. INSTALL TRANSMITTER (CARD KEY) BATTERY Click here
SEE MORE:
Power Source Mode does not Change to ON (READY)
DESCRIPTION When the electrical key transmitter sub-assembly is in the cabin and the power switch is pressed, the certification ECU (smart key ECU assembly) receives a signal and changes the power source mode. In addition, when the power switch is pressed with the shift lever in P and the brake peda
Inspection
INSPECTION PROCEDURE 1. INSPECT ACCELERATION SENSOR (a) Connect 3 1.5 V dry cell batteries in series. (b) Connect a positive (+) lead from the batteries to terminal 3 (SGB) and a negative (-) lead to terminal 2 (SGG). (c) Measure the voltage according to the value(s) in the table below. Standard Vol
© 2016-2024 Copyright www.lexunx.com
