Lexus NX: Dtc Check / Clear
Lexus NX Service Manual / Vehicle Exterior / Window / Glass / Power Window Control System / Dtc Check / Clear
DTC CHECK / CLEAR
CHECK DTC
(a) Turn the power switch off.
(b) Connect the Techstream to the DLC3.
(c) Turn the power switch on (IG).
(d) Turn the Techstream on.
(e) Enter the following menus: Body Electrical / (desired system) / Trouble Codes.
Body Electrical > Master Switch > Trouble Codes Body Electrical > D-Door Motor > Trouble Codes Body Electrical > P-Door Motor > Trouble Codes Body Electrical > RL-Door Motor > Trouble Codes Body Electrical > RR-Door Motor > Trouble Codes(f) Check the details of the DTC(s).
Click here .gif)
CLEAR DTC
(a) Turn the power switch off.
(b) Connect the Techstream to the DLC3.
(c) Turn the power switch on (IG).
(d) Turn the Techstream on.
(e) Enter the following menus: Body Electrical / (desired system) / Trouble Codes.
Body Electrical > Master Switch > Clear DTCs Body Electrical > D-Door Motor > Clear DTCs Body Electrical > P-Door Motor > Clear DTCs Body Electrical > RL-Door Motor > Clear DTCs Body Electrical > RR-Door Motor > Clear DTCs(f) Clear the DTCs.
READ NEXT:
Fail-safe Chart
FAIL-SAFE CHART PULSE FAILURE (a) If the pulse sensor malfunctions, the following power window operations are prohibited. Multiplex Network Master Switch Assembly, Power Window Regulator Switch Assemb
Data List / Active Test
DATA LIST / ACTIVE TEST DATA LIST HINT: Using the Techstream to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. Th
Diagnostic Trouble Code Chart
DIAGNOSTIC TROUBLE CODE CHART Power Window Control System DTC No. Detection Item Link B2311 Power Window Motor Malfunction B2311 Power Window Motor Malfunction B2311
SEE MORE:
Installation
INSTALLATION PROCEDURE 1. INSTALL VEHICLE APPROACHING SPEAKER CONTROLLER (a) Connect the connector. (b) Attach the hook to install the vehicle approaching speaker controller. NOTICE:
When installing the vehicle approaching speaker controller, take care not to damage it.
Do not reuse a vehicle a
Removal
REMOVAL CAUTION / NOTICE / HINT NOTICE: Do not remove the oil pump and oil pump relief valve from the timing chain cover assembly. PROCEDURE 1. REMOVE ENGINE AND TRANSAXLE Click here 2. REMOVE ENGINE WIRE Click here 3. REMOVE IGNITION COIL ASSEMBLY Click here 4. REMOVE CYLINDER HEAD COVER
© 2016-2025 Copyright www.lexunx.com
