Lexus NX: Heated steering wheel/seat heaters/ seat ventilators

Lexus NX Owners Manual / Interior features / Using the air conditioning system and defogger / Heated steering wheel/seat heaters/ seat ventilators

Warm up the grip of the steering wheel

Warm up the seat upholstery

Maintain good airflow on the seat upholstery by blowing air from the seats

WARNING

■To prevent minor burn injuries Care should be taken if anyone in the following categories comes in contact with the steering wheel or seats when the heater is on:

NOTICE

■To prevent damage to the seat heaters and seat ventilators Do not put heavy objects that have an uneven surface on the seat and do not stick sharp objects (needles, nails, etc.) into the seat.

■To prevent battery discharge Do not use the functions when the hybrid system is off.

Heated steering wheel

Turns the heated steering wheel on/off

The indicator light comes on when the heated steering wheel is operating.

Lexus NX. Using the air conditioning system and defogger

■Operation condition The power switch is in ON mode.

■Timer function The heated steering wheel will automatically turn off after about 30 minutes.

Seat heaters

■ Front

Vehicles without seat ventilators

Each time the switch is pressed, the operation condition changes as follows.

Hi (3 segments lit) Mid (2 segments lit) Lo (1 segment lit) Off The level indicator (amber) A light up during operation.

Lexus NX. Using the air conditioning system and defogger

Vehicles with seat ventilators

Each time the switch is pressed, the operation condition changes as follows.

Hi (3 segments lit) Mid (2 segments lit) Lo (1 segment lit) Off

The indicator (amber) and level indicator (green) A light up during operation.

Lexus NX. Using the air conditioning system and defogger

■ Rear Each time the switch is pressed, the operation condition changes as follows.

Hi (3 segments lit) Mid (2 segments lit) Lo (1 segment lit) Off The level indicator (amber) A lights up during operation.

Lexus NX. Using the air conditioning system and defogger

■Operation condition The seat heaters can be used when the power switch is in ON mode.

WARNING

■To prevent causes of overheating and minor burn injuries Observe the following precautions when using a seat heater

Seat ventilators (front)

Each time the switch is pressed, the operation condition changes as follows.

Hi (3 segments lit) Mid (2 segments lit) Lo (1 segment lit) Off

The indicator (green) and level indicator (green) A light up during operation.

Lexus NX. Using the air conditioning system and defogger

■Operation condition The power switch is in ON mode.

READ NEXT:

 Using the interior lights

Interior lights list Location of the interior lights Outer foot lights Personal lights Front interior light Rear interior light Footwell lights When the power switch is in ON mo

 Using the storage features

 List of storage features

Location of the storage features Glove box Bottle holders Console box Cup holders Auxiliary box WARNING ■Items that should not be left in the vehicle Do not leave glasses, li

SEE MORE:

 Door Control Switch

ComponentsCOMPONENTS ILLUSTRATION *1 DOOR CONTROL SWITCH ASSEMBLY *2 POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL *3 FRONT DOOR ARMREST BASE PANEL - - RemovalREMOVAL CAUTION / NOTICE / HINT HINT: Use the same procedure for RHD and LHD vehicles

 Data Signal Circuit between Radio Receiver and Stereo Jack Adapter

DESCRIPTION The No. 1 stereo jack adapter assembly sends the sound data signal or image data signal from a USB device to the radio receiver assembly via this circuit. WIRING DIAGRAM PROCEDURE 1. CHECK HARNESS AND CONNECTOR (RADIO RECEIVER ASSEMBLY - NO. 1 STEREO JACK ADAPTER ASSEMBLY) (

© 2016-2026 Copyright www.lexunx.com