Lexus NX: Precaution
Lexus NX Service Manual / Suspension / Suspension Control / Adaptive Variable Suspension System / Precaution
PRECAUTION
ADAPTIVE VARIABLE SUSPENSION SYSTEM PRECAUTION
NOTICE:
- Performing work after replacing the absorber control ECU with a normally functioning one from another vehicle may result in DTCs being stored, or have a negative effect on other systems. When replacing the absorber control ECU, be sure to install a new one.
-
After replacing the absorber control ECU, enter test mode to make sure that all the test mode DTCs can be cleared and to perform registration of vehicle identification information.
Click here
.gif)
READ NEXT:
Parts Location
PARTS LOCATION ILLUSTRATION *1 FRONT ABSORBER CONTROL ACTUATOR RH (FRONT SHOCK ABSORBER ASSEMBLY RH) *2 FRONT ABSORBER CONTROL ACTUATOR LH (FRONT SHOCK ABSORBER ASSEMBLY LH) *3 REAR AB
System Diagram
SYSTEM DIAGRAM
System Description
SYSTEM DESCRIPTION ADAPTIVE VARIABLE SUSPENSION SYSTEM DESCRIPTION (a) The absorber control ECU receives signals from the sensors and switches to control the absorber control actuator (shock absorber
SEE MORE:
Back Door Closer Switch Malfunction (B2251)
DESCRIPTION The multiplex network door ECU receives signals from the latch switch, initial switch, pawl switch and back door courtesy switch, which are built into the back door lock assembly. Based on these switch signals, the latch position of the back door lock assembly is determined. DTC No.
Installation
INSTALLATION CAUTION / NOTICE / HINT CAUTION: Wear protective gloves. Sharp areas on the parts may injure your hands. PROCEDURE 1. INSTALL SEAT POSITION AIRBAG SENSOR (a) Align the adjustment support and set the seat position airbag sensor into place. *a Adjustment Support
© 2016-2026 Copyright www.lexunx.com
