Lexus NX: Refrigerant
READ NEXT:
Precaution
PRECAUTION PRECAUTIONS FOR REFRIGERANT HFO-1234yf (R1234yf) (a) Compatibility (1) The parts used in the refrigerant cycle, etc. of the HFO-1234yf (R1234yf) system are not compatible with the conventio
Replacement
REPLACEMENT PROCEDURE 1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM (a) Turn the power switch on (READY). (b) Operate the cooler compressor under the conditions shown below: Item Condition
Refrigerant Line
ComponentsCOMPONENTS ILLUSTRATION *1 LIQUID TUBE SUB-ASSEMBLY *2 DISCHARGE HOSE SUB-ASSEMBLY *3 SUCTION HOSE SUB-ASSEMBLY *4 AIR CONDITIONER TUBE AND ACCESSORY ASSEMBLY *5 P
SEE MORE:
DC/DC Converter Voltage Sensor "A" Low (P0E33-589,P0E34-590)
DESCRIPTION The MG ECU, which is built into the inverter with converter assembly, detects pre-boosting high voltage (VL) using the voltage sensor in the boost converter to control boosting. The MG ECU also monitors the boost converter voltage sensor signal line and detects malfunctions. DTC No.
Installation
INSTALLATION PROCEDURE 1. INSTALL REAR SEAT CENTER LAP TYPE BELT ASSEMBLY LH (a) Install the rear seat center lap type belt assembly LH with the nut. Torque: 42 N·m {428 kgf·cm, 31 ft·lbf} NOTICE: The anchor part of the rear seat center lap type belt assembly LH must not overlap the protrudin
© 2016-2026 Copyright www.lexunx.com
