Lexus NX: Terminals Of Ecu
Lexus NX Service Manual / Audio & Visual & Telematics / Cellular Communication / Lexus Enform System / Terminals Of Ecu
TERMINALS OF ECU
DCM (TELEMATICS TRANSCEIVER)
Click here .gif)
RADIO RECEIVER ASSEMBLY
Click here
NAVIGATION ECU
Click here
READ NEXT:
Diagnosis System
DIAGNOSIS SYSTEM DESCRIPTION (a) Diagnostic Trouble Codes (DTCs) for the LEXUS ENFORM system can be read from the Data Link Connector 3 (DLC3) of the vehicle. When the system seems to be malfunctionin
Confirm Cellular Phone Functionality
PROCEDURE 1. CHECK CUSTOMER'S CELLULAR PHONE COMPATIBILITY (a) Check if the cellular phone is compatible (Refer to http://www.lexus.com/Enform/). Result Proceed to Cellular phone is
Confirm Vehicle Headunit Functionality
PROCEDURE 1. CHECK PROBLEM SYMPTOMS (a) Check the app type when the problem occurred. Result Proceed to When using Fleet Apps A When using Infotainment App B B GO T
SEE MORE:
High Voltage Power Resource (P3004-803)
DTC SUMMARY MALFUNCTION DESCRIPTION The hybrid vehicle control ECU monitors the high-voltage wiring between the HV battery and inverter with converter assembly and detects an open circuit malfunction. HINT:
This DTC is differentiated from P3004-131 based on detection timing (after power switch is
Removal
REMOVAL CAUTION / NOTICE / HINT HINT:
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
PROCEDURE 1. REMOVE FRONT DOOR TRIM COVER LH Click here 2. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG LH Click here 3. REMOVE POWER WINDOW REGULATOR MAST
© 2016-2026 Copyright www.lexunx.com
