Lexus NX: Ultrasonic Sensor (for Front)
Lexus NX Service Manual / Audio & Visual & Telematics / Park Assist / Monitoring / Ultrasonic Sensor (for Front)
READ NEXT:
Components
COMPONENTS ILLUSTRATION *A except Sport Package - - *1 FRONT CENTER ULTRASONIC SENSOR *2 FRONT CORNER ULTRASONIC SENSOR *3 FRONT CORNER ULTRASONIC SENSOR RETAINER *4 NO.
Removal
REMOVAL PROCEDURE 1. PRECAUTION Click here 2. REMOVE FRONT BUMPER COVER (a) for Sport Pacakge: Click here (b) except Sport Pacakge: Click here 3. REMOVE NO. 3 ENGINE ROOM WIRE (a) for Sport Paca
Inspection
INSPECTION PROCEDURE 1. INSPECT FRONT CENTER ULTRASONIC SENSOR (a) Measure the resistance according to the value(s) in the table below. Standard Resistance: Tester Connection Condition Spec
SEE MORE:
Disassembly
DISASSEMBLY PROCEDURE 1. REMOVE ENGINE COVER JOINT (a) Remove the 3 engine cover joints. 2. REMOVE SPARK PLUG Click here 3. REMOVE KNOCK CONTROL SENSOR Click here 4. REMOVE ENGINE COOLANT TEMPERATURE SENSOR Click here 5. REMOVE ENGINE OIL PRESSURE SWITCH ASSEMBLY Click here 6.
Dtc Check / Clear
DTC CHECK / CLEAR CHECK DTC (a) Connect the Techstream to the DLC3. (b) Turn the power switch on (IG). (c) Turn the Techstream on. (d) Enter the following menus: Body Electrical / Sliding Roof / Trouble Codes. Body Electrical > Sliding Roof > Trouble Codes (e) Check the details of the DTC(s).
© 2016-2025 Copyright www.lexunx.com
