Lexus NX: Customize Parameters

CUSTOMIZE PARAMETERS

CUSTOMIZE POWER WINDOW CONTROL SYSTEM

HINT:

The following items can be customized.

NOTICE:

  • When the customer requests a change in a function, first make sure that the function can be customized.
  • Be sure to make notes of the current settings before customizing.
  • When troubleshooting a function, first make sure that the function is set to the default setting.

(a) Customizing with the Techstream

(1) Turn the power switch off.

(2) Connect the Techstream to the DLC3.

(3) Turn the power switch on (IG).

(4) Turn the Techstream on.

(5) Enter the following menus: Customize Setting / Power Window.

(6) Select the setting by referring to the table below.

Power Window

Tester Display

Description

Default

Setting

ECU

Door Key P/W Up

This function is used to close the windows by operating the mechanical key.

OFF

0:OFF,1:ON

Main body ECU (Multiplex network body ECU)

Door Key P/W Down

This function is used to open the windows by operating the mechanical key.

OFF

0:OFF,1:ON

Main body ECU (Multiplex network body ECU)

P/W Up W/ Transmit

This function is used to close the windows using the electrical key transmitter sub-assembly.

OFF

0:OFF,1:ON

Main body ECU (Multiplex network body ECU)

P/W Down W/ Transmit

This function is used to open the windows using the electrical key transmitter sub-assembly.

OFF

0:OFF,1:ON

Main body ECU (Multiplex network body ECU)

D Window Auto Up

This function is used to enable or disable the auto up function for the driver door window using the multiplex network master switch assembly.

ON

0:OFF,1:ON

Front power window regulator motor assembly LH

P Window Auto Up

This function is used to enable or disable the auto up function for the front passenger door window using the power window regulator switch assembly.

ON

0:OFF,1:ON

Front power window regulator motor assembly RH

RR Window Auto Up

This function is used to enable or disable the auto up function using the rear power window regulator switch assembly (for Rear RH door).

ON

0:OFF,1:ON

Rear power window regulator motor assembly RH

RL Window Auto Up

This function is used to enable or disable the auto up function using the rear power window regulator switch assembly (for Rear LH door).

ON

0:OFF,1:ON

Rear power window regulator motor assembly LH

P Window Auto Up From Driver

This function is used to enable or disable the remote auto up function for the front passenger door window using the multiplex network master switch assembly.

ON

0:OFF,1:ON

Front power window regulator motor assembly RH

RR Window Auto Up From Driver

This function is used to enable or disable the remote auto up function for the rear RH door window using the multiplex network master switch assembly.

ON

0:OFF,1:ON

Rear power window regulator motor assembly RH

RL Window Auto Up From Driver

This function is used to enable or disable the remote auto up function for the rear LH door window using the multiplex network master switch assembly.

ON

0:OFF,1:ON

Rear power window regulator motor assembly LH

D Window Auto Down

This function is used to enable or disable the auto down function for the driver door window using the multiplex network master switch assembly.

ON

0:OFF,1:ON

Front power window regulator motor assembly LH

P Window Auto Down

This function is used to enable or disable the auto down function for the driver door window using the multiplex network master switch assembly.

ON

0:OFF,1:ON

Front power window regulator motor assembly RH

RR Window Auto Down

This function is used to enable or disable the auto down function using the rear power window regulator switch assembly (for Rear RH door).

ON

0:OFF,1:ON

Rear power window regulator motor assembly RH

RL Window Auto Down

This function is used to enable or disable the auto down function using the rear power window regulator switch assembly (for Rear LH door).

ON

0:OFF,1:ON

Rear power window regulator motor assembly LH

P Window Auto Down From Driver

This function is used to enable or disable the remote auto down function for the front passenger door window using the multiplex network master switch assembly.

ON

0:OFF,1:ON

Front power window regulator motor assembly RH

RR Window Auto Down From Driver

This function is used to enable or disable the remote auto up function for the rear RH door window using the multiplex network master switch assembly.

ON

0:OFF,1:ON

Rear power window regulator motor assembly RH

RL Window Auto Down From Driver

This function is used to enable or disable the remote auto down function for the rear LH door window using the multiplex network master switch assembly.

ON

0:OFF,1:ON

Rear power window regulator motor assembly LH

(7) Enter the following menus: Customize Setting / Wireless Door Lock.

(8) Select the setting by referring to the table below.

Wireless Door Lock

Tester Display

Description

Default

Setting

ECU

P/W Wireless Ope Buzz

This function turns the wireless power window buzzer response on or off.

ON

0:OFF,1:ON

Main body ECU (Multiplex network body ECU)

(9) Enter the following menus: Customize Setting / Security.

(10) Select the setting by referring to the table below.

Security

Tester Display

Description

Default

Setting

ECU

Window Open Warning

This function is used to enable or disable the window open warning.

ON

0:OFF,1:ON

Main body ECU (Multiplex network body ECU)

READ NEXT:

 Initialization

INITIALIZATION INITIALIZE POWER WINDOW CONTROL SYSTEM (ALL DOORS) NOTICE: When a door window regulator assembly, power window regulator motor assembly, door glass or door glass run is reinstalled o

 Problem Symptoms Table

PROBLEM SYMPTOMS TABLE NOTICE: Recognition code registration is necessary when replacing the main body ECU (multiplex network body ECU). If the main body ECU (multiplex network body ECU) is repla

 Terminals Of Ecu

TERMINALS OF ECU CHECK MULTIPLEX NETWORK MASTER SWITCH ASSEMBLY (a) Disconnect the M10 multiplex network master switch assembly connector. (b) Measure the voltage and resistance according to the valu

SEE MORE:

 Parts Location

PARTS LOCATION ILLUSTRATION *1 NO. 1 ENGINE ROOM RELAY BLOCK AND NO. 1 JUNCTION BLOCK ASSEMBLY - AM2 FUSE - STRG LOCK FUSE *2 NO. 2 ENGINE ROOM RELAY BLOCK AND NO. 2 JUNCTION BLOCK ASSEMBLY - IMMOBI FUSE ILLUSTRATION *1 POWER SWITCH *2 CERTIFICATION ECU (SMART KEY ECU ASSEMBLY

 Pointer not Displayed on Screen or Pointer does not Move

CAUTION / NOTICE / HINT NOTICE: When replacing the radio receiver assembly, always replace it with a new one. If a radio receiver assembly which was installed to another vehicle is used, the following may occur: A communication malfunction DTC may be stored. The radio receiver assembly may not

© 2016-2024 Copyright www.lexunx.com