Lexus NX: Diagnosis System
Lexus NX Service Manual / Engine & Hybrid System / Cruise Control / Front Camera System / Diagnosis System
DIAGNOSIS SYSTEM
DIAGNOSIS FUNCTION
(a) The front camera system does not have a notification function such as a warning light when a DTC is detected. When a malfunction occurs, it stores a DTC and sends it to the systems using the front camera system. The system receiving the malfunction information displays a warning to notify the driver of the malfunction.
HINT:
First refer to How to Proceed with Troubleshooting for the pre-collision system.
Click here .gif)
READ NEXT:
Dtc Check / Clear
DTC CHECK / CLEAR CHECK DTC (a) Connect the Techstream to the DLC3. (b) Turn the power switch on (IG). (c) Turn the Techstream on. (d) Enter the following menus: Chassis / Front Recognition Camera / T
Freeze Frame Data
FREEZE FRAME DATA DESCRIPTION (a) When a front camera system DTC is stored, the forward recognition camera stores the current vehicle (ECU or sensor) state as Freeze Frame Data. CHECK FREEZE FRAME DAT
Fail-safe Chart
FAIL-SAFE CHART FRONT CAMERA SYSTEM FAIL-SAFE CHART (a) When a malfunction occurs in the front camera system, a message is displayed on the multi-information display and control is canceled in accorda
SEE MORE:
Data List / Active Test
DATA LIST / ACTIVE TEST DATA LIST NOTICE: In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not. HINT: Using the GTS to read the Data List allows the values or states of switch
Installation
INSTALLATION PROCEDURE 1. INSTALL MULTIPLEX NETWORK BODY ECU (MAIN BODY ECU) NOTICE:
Make sure that no foreign matter gets on the connecting surfaces.
Do not touch the ECU connector.
(a) Insert the multiplex network body ECU (main body ECU) up to the position where it contacts the housing si
© 2016-2026 Copyright www.lexunx.com
