Lexus NX: Diagnostic Trouble Code Chart
Lexus NX Service Manual / Vehicle Interior / Door Lock / Power Door Lock Control System / Diagnostic Trouble Code Chart
DIAGNOSTIC TROUBLE CODE CHART
Power Door Lock Control System| DTC No. | Detection Item | Link |
|---|---|---|
| B1243 | GSW Terminal Circuit Malfunction | |
.gif)
READ NEXT:
GSW Terminal Circuit Malfunction (B1243)
DESCRIPTION If the collision door lock release function does not operate normally, or an open or short in the GSW input circuit of the main body ECU (multiplex network body ECU) is detected, DTC B1243
All Doors LOCK/UNLOCK Functions do not Operate Via Door Control Switch or Door Key Cylinder
DESCRIPTION The main body ECU (multiplex network body ECU) receives switch signals from the multiplex network master switch assembly and driver door key cylinder lock or unlock switch signals from the
All Doors LOCK/UNLOCK Functions do not Operate Via Door Control Switch
DESCRIPTION The main body ECU (multiplex network body ECU) receives switch signals from the door control switch assembly on the front passenger door and activates the door lock motor on each door acco
SEE MORE:
Lost Communication with Tilt & (U1115)
DESCRIPTION DTC No. Detection Item DTC Detection Condition Trouble Area DTC Output from U1115 Lost Communication with Tilt & Telescopic Module There is no communication from the multiplex tilt and telescopic ECU.
Power source circuit of multiplex tilt and telescopic ECU
Removal
REMOVAL CAUTION / NOTICE / HINT HINT:
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
PROCEDURE 1. REMOVE OUTER MIRROR LH (a) Push the upper part of the mirror surface and tilt it. (b) Apply protective tape to the areas shown in the illustrat
© 2016-2025 Copyright www.lexunx.com
