Lexus NX: Front Camera
- Components
- Removal
- Installation
- Before Starting Adjustment
- Adjustment (one Time Recognition)
- Adjustment (sequential Recognition)
READ NEXT:
Components
COMPONENTS ILLUSTRATION *1 FORWARD RECOGNITION CAMERA *2 FORWARD RECOGNITION LATCH *3 NO. 1 FORWARD RECOGNITION COVER *4 NO. 2 FORWARD RECOGNITION COVER
Removal
REMOVAL CAUTION / NOTICE / HINT NOTICE:
When replacing the forward recognition camera, replace it with a new one.
Replace the forward recognition camera if there is any foreign matter on the came
Installation
INSTALLATION PROCEDURE 1. INSTALL FORWARD RECOGNITION CAMERA NOTICE:
When replacing the forward recognition camera, replace it with a new one.
If the forward recognition camera has been struck or
SEE MORE:
P/W Master Switch Communication Stop (B1206)
DESCRIPTION This DTC is stored when LIN communication between the multiplex network master switch assembly and main body ECU (multiplex network body ECU) stops for 10 seconds or more. DTC No. Detection Item DTC Detection Condition Trouble Area B1206 P/W Master Switch Communication Sto
Removal
REMOVAL CAUTION / NOTICE / HINT HINT:
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
PROCEDURE 1. REMOVE FRONT DOOR TRIM COVER LH Click here 2. REMOVE FRONT DOOR INSIDE HANDLE BEZEL PLUG LH Click here 3. REMOVE POWER WINDOW REGULATOR MAST
© 2016-2026 Copyright www.lexunx.com
