Lexus NX: Installation
INSTALLATION
PROCEDURE
1. INSTALL CLEARANCE WARNING ECU ASSEMBLY
(a) Attach the 2 claws to install the clearance warning ECU assembly.
2. INSTALL ECU INTEGRATION BOX RH
Click here .gif)
3. INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY
Click here
4. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY
Click here
5. INITIALIZATION AFTER RECONNECTING AUXILIARY BATTERY TERMINAL
Click here
HINT:
When disconnecting and reconnecting the auxiliary battery, there is an automatic learning function that completes learning when the respective system is used.
Click here
6. INSTALL DECK FLOOR BOX LH
Click here
7. INSTALL REAR DECK FLOOR BOX
Click here
8. INSTALL NO. 3 DECK BOARD SUB-ASSEMBLY
Click here
9. CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL
Click here
10. PERFORM INITIALIZATION
Click here
READ NEXT:
Precaution
PRECAUTION PRECAUTION FOR SERVICING VEHICLE (a) After ECUs or parts are removed and installed, or replaced during inspection or servicing the vehicle, it is necessary to perform certain procedures (ad
Parts Location
PARTS LOCATION ILLUSTRATION *A w/ Panoramic View Monitor System - - *1 FRONT CORNER ULTRASONIC SENSOR (FR SENSOR) *2 FRONT CENTER ULTRASONIC SENSOR (FRC SENSOR) *3 FRONT CENT
SEE MORE:
Test Mode Procedure
TEST MODE PROCEDURE TEST MODE PROCEDURE NOTICE:
After replacing the absorber control ECU, it is necessary to perform registration of vehicle identification information. Vehicle identification information is automatically acquired when the system enters test mode.
When vehicle identification inf
Front Passenger Side Power Window Switch
ComponentsCOMPONENTS ILLUSTRATION *1 POWER WINDOW REGULATOR SWITCH ASSEMBLY *2 POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT DOOR ARMREST BASE PANEL *3 FRONT DOOR ARMREST BASE PANEL - - RemovalREMOVAL PROCEDURE 1. REMOVE POWER WINDOW REGULATOR SWITCH ASSEMBLY WITH FRONT
