Lexus NX: Millimeter Wave Radar Sensor

READ NEXT:

 Removal

REMOVAL PROCEDURE 1. REMOVE FRONT BUMPER ASSEMBLY (a) for Sport Package: Click here (b) except Sport Package: Click here 2. REMOVE MILLIMETER WAVE RADAR SENSOR ASSEMBLY NOTICE: Do not reuse the mi

 Adjustment

ADJUSTMENT CAUTION / NOTICE / HINT CAUTION: Radiofrequency radiation exposure information: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. Th

 Installation

INSTALLATION CAUTION / NOTICE / HINT NOTICE: If the millimeter wave radar sensor assembly has been struck or dropped, replace the millimeter wave radar sensor assembly with a new one. PROCEDURE 1. INS

SEE MORE:

 Dtc Check / Clear

DTC CHECK / CLEAR DTC CHECK/CLEAR (a) Check for DTCs. (1) Connect the Techstream to the DLC3. (2) Turn the power switch on (IG). (3) Turn the Techstream on. (4) Read the DTCs following the prompts on the Techstream screen. Enter the following menus: Chassis / ABS/VSC/TRAC / Trouble Codes. Chassis &g

 Installation

INSTALLATION PROCEDURE 1. INSTALL TIRE PRESSURE WARNING ECU AND RECEIVER (a) Connect the connector to the tire pressure warning ECU and receiver. (b) Attach the 2 guides to temporarily install the tire pressure warning ECU and receiver. (c) Install the bolt. Torque: for bolt A : 8.3 N·m {85 kg

© 2016-2024 Copyright www.lexunx.com