Lexus NX: Precaution
Lexus NX Service Manual / Engine & Hybrid System / 2ar-fxe (engine Mechanical) / Engine Unit / Precaution
PRECAUTION
HINT:
- Any digits beyond the 0.01 mm (1/1000 in.) place for standard, minimum and maximum values should be used as a reference only.
- When both standard and maximum or minimum values are listed for an inspection, use the standard value as a reference only and base any judgments on the maximum and minimum values.
READ NEXT:
Components
COMPONENTS ILLUSTRATION *1 EXHAUST MANIFOLD CONVERTER SUB-ASSEMBLY *2 MANIFOLD STAY *3 NO. 1 EXHAUST MANIFOLD HEAT INSULATOR *4 NO. 2 EGR PIPE *5 NO. 2 MANIFOLD STAY *6 E
Removal
REMOVAL PROCEDURE 1. REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE (a) Remove the engine oil level dipstick. (b) Remove the bolt and engine oil level dipstick guide. (c) Remove the O-ring from
Disassembly
DISASSEMBLY PROCEDURE 1. REMOVE ENGINE COVER JOINT (a) Remove the 3 engine cover joints. 2. REMOVE SPARK PLUG Click here 3. REMOVE KNOCK CONTROL SENSOR Click here 4. REMOVE ENGINE C
SEE MORE:
Hybrid Battery Voltage / DC/DC Converter Voltage Correlation (P1C2D-587)
DTC SUMMARY MALFUNCTION DESCRIPTION The hybrid vehicle control ECU detects a VB sensor or VL sensor malfunction. The cause of this malfunction may be one of the following: Inside of inverter voltage sensor circuit malfunction
Voltage sensor malfunction
Motor generator control ECU (MG ECU) malfu
Driver Side Door ECU Communication Stop (B2321)
DESCRIPTION This DTC is stored when LIN communication between the front power window regulator motor assembly LH and main body ECU (multiplex network body ECU) stops for 10 seconds or more. DTC No. Detection Item DTC Detection Condition Trouble Area B2321 Driver Side Door ECU Communic
© 2016-2026 Copyright www.lexunx.com
