Lexus NX: System Diagram
Lexus NX Service Manual / Audio & Visual & Telematics / Garage Door Opener / Garage Door Opener System / System Diagram
SYSTEM DIAGRAM
READ NEXT:
System Description
SYSTEM DESCRIPTION DESCRIPTION (a) A maximum of 3 kinds of transmitter code based systems (example: garage doors, gates and entry gates) can be registered with the vehicle garage door opener. After re
Registration
REGISTRATION PROCEDURE 1. REGISTER TRANSMITTER CODE HINT:
The vehicle garage door opener records transmitter codes for systems such as garage doors, gates, entry gates, door locks, home lighting sy
On-vehicle Inspection
ON-VEHICLE INSPECTION PROCEDURE 1. INSPECT GARAGE DOOR OPENER (a) Press each switch and check that the red LED turns on. If one or more of the switches does not turn on the LED, check the condition
SEE MORE:
Reassembly
REASSEMBLY PROCEDURE 1. INSTALL NO. 2 MOULDING TAPE HINT:
When installing the No. 2 moulding tape, heat the front bumper cover and No. 2 moulding tape using a heat light.
Use the same procedure described for the other side.
Standard: Item Temperature Front Bumper Cover 20 to 30°
Yaw Rate Sensor (C1234,C1243-C1245,C1279)
DESCRIPTION The skid control ECU (brake booster with master cylinder assembly) receives signals from the yaw rate and acceleration sensor (airbag ECU assembly) via CAN communication. The airbag ECU assembly has a built-in yaw rate and acceleration sensor and detects the vehicle condition using 2 cir
© 2016-2026 Copyright www.lexunx.com
