Lexus NX: Tire And Wheel System
READ NEXT:
How To Proceed With Troubleshooting
PROCEDURE 1. CHECK TIRE AND WHEEL SYSTEM DIAGNOSIS OF IRREGULAR TIRE WEAR GO TO STEP 11
DIAGNOSIS OF TIRE VIBRATION 2. TIGHTEN WHEEL NUTS
NEXT
Inspection
INSPECTION PROCEDURE 1. INSPECT TIRES (a) Check the tires for wear and proper inflation pressure. Specified Pressure (When Tire is Cool): Tire Size Front kPa (kgf/cm2, psi) Rear kPa (kgf/cm2,
SEE MORE:
Removal
REMOVAL PROCEDURE 1. REMOVE FAN SHROUD WITH COOLING FAN Click here 2. REMOVE COOLING FAN WIRE (a) Disconnect the cooling fan ECU connector. (b) Detach the 3 clamps and remove the cooling fan wire. 3. REMOVE COOLING FAN ECU (a) Disconnect the cooling fan motor connector and No. 2
Checking Monitor Status
CHECKING MONITOR STATUS The purpose of the monitor result (mode 06) is to allow access to the results of on-board diagnostic monitoring tests of specific components/systems that are not continuously monitored. Examples are catalysts and evaporative emissions (EVAP) systems. The monitor result allows
© 2016-2026 Copyright www.lexunx.com
