Lexus NX: Air Conditioning Unit
READ NEXT:
Removal
REMOVAL PROCEDURE 1. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM Click here 2. DRAIN ENGINE COOLANT Click here 3. DISCONNECT AIR CONDITIONER TUBE AND ACCESSORY ASSEMBLY (a) Remove the bolt an
Disassembly
DISASSEMBLY PROCEDURE 1. REMOVE AIR CONDITIONING RADIATOR ASSEMBLY (a) Disconnect the No. 1 blower damper servo sub-assembly connector. (b) Detach the 3 clamps and remove the air condit
Reassembly
REASSEMBLY PROCEDURE 1. INSTALL NO. 1 COOLER THERMISTOR Click here 2. INSTALL NO. 1 COOLER EVAPORATOR SUB-ASSEMBLY (a) Sufficiently apply compressor oil to 2 new O-rings and the fitting surface of t
SEE MORE:
Lost Communication with EV ECU (U0100,U0129,U0131,U0142,U0151,U0163,U0182,U023A)
DESCRIPTION DTC No. Detection Item DTC Detection Condition Trouble Area U0100 Lost Communication with EV ECU Both conditions are met:
IG voltage is 10.5 V or higher.
No communication with the ECM or hybrid vehicle control ECU continues for 2 seconds or more.
ECM
Hybri
On-vehicle Inspection
ON-VEHICLE INSPECTION CAUTION / NOTICE / HINT CAUTION: Be sure to follow the correct removal and installation procedures of the seat position airbag sensor. PROCEDURE 1. INSPECT SEAT POSITION AIRBAG SENSOR (for Vehicle not Involved in Collision) (a) Perform a diagnostic system check. Click here 2
© 2016-2024 Copyright www.lexunx.com
