Lexus NX: Components

COMPONENTS

ILLUSTRATION

*1

DECK FLOOR BOX LH

*2

NO. 3 DECK BOARD SUB-ASSEMBLY

*3

REAR DECK FLOOR BOX

*4

NEGATIVE AUXILIARY BATTERY TERMINAL

N*m (kgf*cm, ft.*lbf): Specified torque

-

-

ILLUSTRATION

*1

FUEL PUMP CONTROL ECU ASSEMBLY

*2

PARKING BRAKE ECU ASSEMBLY

*3

CONNECTOR

-

-

N*m (kgf*cm, ft.*lbf): Specified torque

-

-

READ NEXT:

 Removal

REMOVAL CAUTION / NOTICE / HINT NOTICE: While the auxiliary battery is connected, even if the power switch is off, the brake control system activates when the brake pedal is depressed or any door cour

 Installation

INSTALLATION PROCEDURE 1. INSTALL FUEL PUMP CONTROL ECU ASSEMBLY Click here 2. INSTALL PARKING BRAKE ECU ASSEMBLY (a) Install the parking brake ECU assembly with the 2 bolts. Torque: 8.0 N·m {82 k

 Electric Parking Brake Switch

SEE MORE:

 Check Bus 5 Line for Short to +B

DESCRIPTION There may be a short circuit between one of the CAN bus lines and +B when there is no resistance between terminal 15 (CA5H) of the central gateway ECU (network gateway ECU) and terminal 16 (BAT) of the DLC3, or terminal 16 (CA5L) of the central gateway ECU (network gateway ECU) and termi

 Removal

REMOVAL CAUTION / NOTICE / HINT HINT: Use the same procedure for the RH and LH sides. The procedure listed below is for the LH side. PROCEDURE 1. REMOVE REAR WHEEL Click here 2. DISCONNECT REAR SPEED SENSOR LH (a) w/o AVS: Click here (b) w/ AVS: Click here 3. REMOVE REAR SUSPENSION ARM

© 2016-2025 Copyright www.lexunx.com